Daily Papers

High dynamic range (HDR) imaging is of fundamental importance in modern digital photography pipelines and used to produce a high-quality photograph with well exposed regions despite varying illumination across the image. This is typically achieved by merging multiple low dynamic range (LDR) images taken at different exposures. However, over-exposed regions and misalignment errors due to poorly compensated motion result in artefacts such as ghosting. In this paper, we present a new HDR imaging technique that specifically models alignment and exposure uncertainties to produce high quality HDR results. We introduce a strategy that learns to jointly align and assess the alignment and exposure reliability using an HDR-aware, uncertainty-driven attention map that robustly merges the frames into a single high quality HDR image. Further, we introduce a progressive, multi-stage image fusion approach that can flexibly merge any number of LDR images in a permutation-invariant manner. Experimental results show our method can produce better quality HDR images with up to 1.1dB PSNR improvement to the state-of-the-art, and subjective improvements in terms of better detail, colours, and fewer artefacts.

Engineered timber is pivotal to low-carbon construction, but moisture uptake during its service life can compromise structural reliability and impede reuse within a circular economy model. Despite growing interest, quantitative standards for classifying the reusability of moisture-exposed timber are still lacking. This study develops a probabilistic framework to determine the post-exposure reusability of engineered timber. Laminated specimens were soaked to full saturation, dried to 25% moisture content, and subjected to destructive three-point flexural testing. Structural integrity was quantified by a residual-performance metric that assigns 80% weight to the retained flexural modulus and 20% to the retained maximum load, benchmarked against unexposed controls. A hierarchical Bayesian multinomial logistic model with horseshoe priors, calibrated through Markov-Chain Monte-Carlo sampling, jointly infers the decision threshold separating three Modern Methods of Construction (MMC) reuse levels and predicts those levels from five field-measurable features: density, moisture content, specimen size, grain orientation, and surface hardness. Results indicate that a single wet-dry cycle preserves 70% of specimens above the 0.90 residual-performance threshold (Level 1), whereas repeated cycling lowers the mean residual to 0.78 and reallocates many specimens to Levels 2-3. The proposed framework yields quantified decision boundaries and a streamlined on-site testing protocol, providing a foundation for robust quality assurance standards.

Large Language Models (LLMs) have demonstrated powerful capabilities that render them valuable in different applications, including conversational AI products. It is paramount to ensure the security and reliability of these products by mitigating their vulnerabilities towards malicious user interactions, which can lead to the exposure of great risks and reputational repercussions. In this work, we present a comprehensive study on the efficacy of fine-tuning and aligning Chain-of-Thought (CoT) responses of different LLMs that serve as input moderation guardrails. We systematically explore various tuning methods by leveraging a small set of training data to adapt these models as proxy defense mechanisms to detect malicious inputs and provide a reasoning for their verdicts, thereby preventing the exploitation of conversational agents. We rigorously evaluate the efficacy and robustness of different tuning strategies to generalize across diverse adversarial and malicious query types. Our experimental results outline the potential of alignment processes tailored to a varied range of harmful input queries, even with constrained data resources. These techniques significantly enhance the safety of conversational AI systems and provide a feasible framework for deploying more secure and trustworthy AI-driven interactions.

Current exposure correction methods have three challenges, labor-intensive paired data annotation, limited generalizability, and performance degradation in low-level computer vision tasks. In this work, we introduce an innovative Unsupervised Exposure Correction (UEC) method that eliminates the need for manual annotations, offers improved generalizability, and enhances performance in low-level downstream tasks. Our model is trained using freely available paired data from an emulated Image Signal Processing (ISP) pipeline. This approach does not need expensive manual annotations, thereby minimizing individual style biases from the annotation and consequently improving its generalizability. Furthermore, we present a large-scale Radiometry Correction Dataset, specifically designed to emphasize exposure variations, to facilitate unsupervised learning. In addition, we develop a transformation function that preserves image details and outperforms state-of-the-art supervised methods [12], while utilizing only 0.01% of their parameters. Our work further investigates the broader impact of exposure correction on downstream tasks, including edge detection, demonstrating its effectiveness in mitigating the adverse effects of poor exposure on low-level features. The source code and dataset are publicly available at https://github.com/BeyondHeaven/uec_code.

Exposure errors in an image cause a degradation in the contrast and low visibility in the content. In this paper, we address this problem and propose an end-to-end exposure correction model in order to handle both under- and overexposure errors with a single model. Our model contains an image encoder, consecutive residual blocks, and image decoder to synthesize the corrected image. We utilize perceptual loss, feature matching loss, and multi-scale discriminator to increase the quality of the generated image as well as to make the training more stable. The experimental results indicate the effectiveness of proposed model. We achieve the state-of-the-art result on a large-scale exposure dataset. Besides, we investigate the effect of exposure setting of the image on the portrait matting task. We find that under- and overexposed images cause severe degradation in the performance of the portrait matting models. We show that after applying exposure correction with the proposed model, the portrait matting quality increases significantly. https://github.com/yamand16/ExposureCorrection

Evaluating the reliability of news sources is a routine task for journalists and organizations committed to acquiring and disseminating accurate information. Recent research has shown that predicting sources' reliability represents an important first-prior step in addressing additional challenges such as fake news detection and fact-checking. In this paper, we introduce a novel approach for source reliability estimation that leverages reinforcement learning strategies for estimating the reliability degree of news sources. Contrary to previous research, our proposed approach models the problem as the estimation of a reliability degree, and not a reliability label, based on how all the news media sources interact with each other on the Web. We validated the effectiveness of our method on a news media reliability dataset that is an order of magnitude larger than comparable existing datasets. Results show that the estimated reliability degrees strongly correlates with journalists-provided scores (Spearman=0.80) and can effectively predict reliability labels (macro-avg. F_1 score=81.05). We release our implementation and dataset, aiming to provide a valuable resource for the NLP community working on information verification.

Capturing photographs with wrong exposures remains a major source of errors in camera-based imaging. Exposure problems are categorized as either: (i) overexposed, where the camera exposure was too long, resulting in bright and washed-out image regions, or (ii) underexposed, where the exposure was too short, resulting in dark regions. Both under- and overexposure greatly reduce the contrast and visual appeal of an image. Prior work mainly focuses on underexposed images or general image enhancement. In contrast, our proposed method targets both over- and underexposure errors in photographs. We formulate the exposure correction problem as two main sub-problems: (i) color enhancement and (ii) detail enhancement. Accordingly, we propose a coarse-to-fine deep neural network (DNN) model, trainable in an end-to-end manner, that addresses each sub-problem separately. A key aspect of our solution is a new dataset of over 24,000 images exhibiting the broadest range of exposure values to date with a corresponding properly exposed image. Our method achieves results on par with existing state-of-the-art methods on underexposed images and yields significant improvements for images suffering from overexposure errors.

Diffusion models have demonstrated impressive generative capabilities, but their exposure bias problem, described as the input mismatch between training and sampling, lacks in-depth exploration. In this paper, we systematically investigate the exposure bias problem in diffusion models by first analytically modelling the sampling distribution, based on which we then attribute the prediction error at each sampling step as the root cause of the exposure bias issue. Furthermore, we discuss potential solutions to this issue and propose an intuitive metric for it. Along with the elucidation of exposure bias, we propose a simple, yet effective, training-free method called Epsilon Scaling to alleviate the exposure bias. We show that Epsilon Scaling explicitly moves the sampling trajectory closer to the vector field learned in the training phase by scaling down the network output (Epsilon), mitigating the input mismatch between training and sampling. Experiments on various diffusion frameworks (ADM, DDPM/DDIM, EDM, LDM), unconditional and conditional settings, and deterministic vs. stochastic sampling verify the effectiveness of our method. Remarkably, our ADM-ES, as a SOTA stochastic sampler, obtains 2.17 FID on CIFAR-10 under 100-step unconditional generation. The code is available at https://github.com/forever208/ADM-ES and https://github.com/forever208/EDM-ES.

Clinical decision-support systems are expert systems whose recommendations clinicians act on directly, yet they are usually cleared on one aggregate accuracy number from a held-out test set. That number says nothing about input reliability under encoding shifts, subgroup gaps, threshold sensitivity, or operational feasibility. We present RISED, a pre-deployment evaluation framework operationalising five dimensions (Reliability, Inclusivity, Sensitivity, Equity, Deployability) through BCa bootstrap 95% confidence intervals, literature-grounded thresholds, and Holm-Bonferroni-corrected PASS / FAIL / INCONCLUSIVE verdicts; Equity is a proxy-dependence diagnostic rather than a gating test. Applied to seven cohorts spanning 35 years (n from 303 to 99,492), RISED surfaces failures invisible to AUROC: on Diabetes 130, Reliability passes by three orders of magnitude (PSS = 0.0004) while Inclusivity (AUC parity gap = 0.262) and Sensitivity (max threshold-flip rate 49.1%) fail decisively; both NHIS cohorts reproduce this. NHANES 2021-2023, with a complete feature profile, achieves INCONCLUSIVE verdicts; BRFSS 2024 produces the suite's most severe Sensitivity failure (max threshold-flip rate 64.2%) after instrument rotation removed hypertension and cholesterol. The pattern recurs on credit- and income-prediction cohorts, confirming domain-agnosticity; a multi-model check shows the failures are data-driven, not model-specific. RISED ships as an open-source Python package complementing TRIPOD+AI, FUTURE-AI, and Fairlearn with the structured numerical evidence those standards require but do not prescribe.

High Dynamic Range (HDR) generation remains challenging for generative models, which are largely limited to low dynamic range outputs. Recent diffusionbased approaches approximate HDR by generating multiple exposure-conditioned samples, incurring high computational cost and structural inconsistencies across exposures. We propose LatentHDR, a framework that decouples scene generation from exposure modeling in latent space. A pretrained diffusion backbone produces a single coherent scene representation, while a lightweight conditional latent to-latent head deterministically maps it to exposure-specific representations. This enables the generation of a dense, structurally consistent exposure stack in a single pass. This design eliminates multi-pass diffusion, ensures cross-exposure alignment, and enables scalable HDR synthesis. LatentHDR supports both textand image-conditioned HDR generation for perspective and panoramic scenes. Experiments on synthetic data and the SI-HDR benchmark show that LatentHDR achieves state-of-the-art dynamic range with competitive perceptual quality, while reducing computation by an order of magnitude. Our results demonstrate that high-quality HDR generation can be achieved through structured latent modeling, challenging the need for stochastic multi-exposure generation.

Refusal rates are a poor proxy for LLM safety, i.e., a model may over-refuse benign prompts while still complying with harmful ones. We audit both failure modes across 21 open-weight LLMs on four safety benchmarks (OR-Bench, XSTest, ToxiGen, BOLD), using a composition adjustment to isolate model sensitivity from dataset toxicity confounds. We report three findings. First, models adopt fundamentally different calibration strategies: conservative ecosystems such as Llama suppress unsafe outputs at the cost of elevated over-refusals, while permissive ecosystems such as DeepSeek and Qwen preserve helpfulness but tolerate higher harmful compliance. Second, demographic protection is unequal: models over-protect prominent racial and religious groups, frequently refusing even benign prompts about them, while providing substantially weaker protection against disability-targeted attacks. Third, refusal and compliance tendencies are stable within model families across generations and scales, suggesting that post-training objectives shape safety behavior more than architecture. Our results call for joint, demographically-aware, and multi-judge safety evaluation.

Given a black-box AI system and a task, at what confidence level can a practitioner trust the system's output? We answer with a reliability level -- a single number per system-task pair, derived from self-consistency sampling and conformal calibration, that serves as a black-box deployment gate with exact, finite-sample, distribution-free guarantees. Self-consistency sampling reduces uncertainty exponentially; conformal calibration guarantees correctness within 1/(n+1) of the target level, regardless of the system's errors -- made transparently visible through larger answer sets for harder questions. Weaker models earn lower reliability levels (not accuracy -- see Definition 2.4): GPT-4.1 earns 94.6% on GSM8K and 96.8% on TruthfulQA, while GPT-4.1-nano earns 89.8% on GSM8K and 66.5% on MMLU. We validate across five benchmarks, five models from three families, and both synthetic and real data. Conditional coverage on solvable items exceeds 0.93 across all configurations; sequential stopping reduces API costs by around 50%.

Exposure correction is one of the fundamental tasks in image processing and computational photography. While various methods have been proposed, they either fail to produce visually pleasing results, or only work well for limited types of image (e.g., underexposed images). In this paper, we present a novel automatic exposure correction method, which is able to robustly produce high-quality results for images of various exposure conditions (e.g., underexposed, overexposed, and partially under- and over-exposed). At the core of our approach is the proposed dual illumination estimation, where we separately cast the under- and over-exposure correction as trivial illumination estimation of the input image and the inverted input image. By performing dual illumination estimation, we obtain two intermediate exposure correction results for the input image, with one fixes the underexposed regions and the other one restores the overexposed regions. A multi-exposure image fusion technique is then employed to adaptively blend the visually best exposed parts in the two intermediate exposure correction images and the input image into a globally well-exposed image. Experiments on a number of challenging images demonstrate the effectiveness of the proposed approach and its superiority over the state-of-the-art methods and popular automatic exposure correction tools.

The lack of freely available standardized datasets represents an aggravating factor during the development and testing the performance of novel computational techniques in exposure assessment and dosimetry research. This hinders progress as researchers are required to generate numerical data (field, power and temperature distribution) anew using simulation software for each exposure scenario. Other than being time consuming, this approach is highly susceptible to errors that occur during the configuration of the electromagnetic model. To address this issue, in this paper, the limited available data on the incident power density and resultant maximum temperature rise on the skin surface considering various steady-state exposure scenarios at 10-90 GHz have been statistically modeled. The synthetic data have been sampled from the fitted statistical multivariate distribution with respect to predetermined dosimetric constraints. We thus present a comprehensive and open-source dataset compiled of the high-fidelity numerical data considering various exposures to a realistic source. Furthermore, different surrogate models for predicting maximum temperature rise on the skin surface were fitted based on the synthetic dataset. All surrogate models were tested on the originally available data where satisfactory predictive performance has been demonstrated. A simple technique of combining quadratic polynomial and tensor-product spline surrogates, each operating on its own cluster of data, has achieved the lowest mean absolute error of 0.058 {\deg}C. Therefore, overall experimental results indicate the validity of the proposed synthetic dataset.

Text-to-image models trained on large-scale data often inevitably ingest unsafe content. While some people observe input-output amplifications, it remains unclear whether and how training data composition directly drives model output safety or by other factors. We shed light on this question by isolating this variable: we train the same text-to-image model on datasets that differ only in their fraction of unsafe images (0\% to 9.6\%), across several dataset scales (100K to 8M). Then we generate images with the resulting models, and evaluate them with four independent safety classifiers. Output unsafety rises monotonically from 16.6\% at 0\% contamination to 25.5\% at 5\%. A factorial design reveals that the proportion, not the absolute count, of unsafe training images is the operative variable. The 16.6\% irreducible baseline at zero contamination implicates the other components, e.g. frozen text encoder, as a residual safety risk -- confirmed by a text encoder ablation showing that SafeCLIP reduces this floor to 9.6\%, while the dose-response effect persists across all three encoders tested. Critically, no quality degradation in terms of FID, CLIPscore and ImageReward accompanies safety filtering. These results establish that data curation and text encoder safety are complementary and independently effective interventions. At the same time, the remaining level of unsafety poses questions for future research about emerging capabilities and compositionality.

Many deployments must compare candidate language models for safety before a labeled benchmark exists for the relevant language, sector, or regulatory regime. We formalize this setting as benchmarkless comparative safety scoring and specify the contract under which a scenario-based audit can be interpreted as deployment evidence. Scores are valid only under a fixed scenario pack, rubric, auditor, judge, sampling configuration, and rerun budget. Because no labels are available, we replace ground-truth agreement with an instrumental-validity chain: responsiveness to a controlled safe-versus-abliterated contrast, dominance of target-driven variance over auditor and judge artifacts, and stability across reruns. We instantiate the chain in SimpleAudit, a local-first scoring instrument, and validate it on a Norwegian safety pack. Safe and abliterated targets separate with AUROC values between 0.89 and 1.00, target identity is the dominant variance component (η^2 approx 0.52), and severity profiles stabilize by ten reruns. Applying the same chain to Petri shows that it admits both tools. The substantial differences arise upstream of the chain, in claim-contract enforcement and deployment fit. A Norwegian public-sector procurement case comparing Borealis and Gemma 3 demonstrates the resulting evidence in practice: the safer model depends on scenario category and risk measure. Consequently, scores, matched deltas, critical rates, uncertainty, and the auditor and judge used must be reported together rather than collapsed into a single ranking.

Scene inference under low-light is a challenging problem due to severe noise in the captured images. One way to reduce noise is to use longer exposure during the capture. However, in the presence of motion (scene or camera motion), longer exposures lead to motion blur, resulting in loss of image information. This creates a trade-off between these two kinds of image degradations: motion blur (due to long exposure) vs. noise (due to short exposure), also referred as a dual image corruption pair in this paper. With the rise of cameras capable of capturing multiple exposures of the same scene simultaneously, it is possible to overcome this trade-off. Our key observation is that although the amount and nature of degradation varies for these different image captures, the semantic content remains the same across all images. To this end, we propose a method to leverage these multi exposure captures for robust inference under low-light and motion. Our method builds on a feature consistency loss to encourage similar results from these individual captures, and uses the ensemble of their final predictions for robust visual recognition. We demonstrate the effectiveness of our approach on simulated images as well as real captures with multiple exposures, and across the tasks of object detection and image classification.

Benchmarks measure whether a model is correct. They do not measure whether a model is reliable. This distinction is largely academic for single-shot inference, but becomes critical for agentic AI systems, where a single rephrased prompt can trigger cascading failures in multi-step execution. Yet this form of instability is not captured by existing evaluations. Hallucinations live in variance: they arise when semantically equivalent prompts activate inconsistent internal pathways, producing divergent outputs. Consistent but incorrect outputs reflect bias or missing knowledge; confident guessing reflects calibration failure. Neither constitutes hallucination under this definition. When error is variance-dominated, reducing redundant pathways improves reliability without adding knowledge. We formalize this through Semantic Stability (SS), measured via Paraphrase Consistency (PC@k): generate k paraphrases, greedy decode each, compute mode agreement. SS is a diagnostic for variance-driven unreliability, not a method for improving correctness. We show that a dense Qwen3-0.6B agrees with itself only 23.8% of the time; at 32% sparsity, agreement jumps to 55.9%. A phase diagram reveals the sweet spot where variance reduction outpaces bias accumulation, and regimes where stability collapses onto wrong answers.

Previous raw image-based low-light image enhancement methods predominantly relied on feed-forward neural networks to learn deterministic mappings from low-light to normally-exposed images. However, they failed to capture critical distribution information, leading to visually undesirable results. This work addresses the issue by seamlessly integrating a diffusion model with a physics-based exposure model. Different from a vanilla diffusion model that has to perform Gaussian denoising, with the injected physics-based exposure model, our restoration process can directly start from a noisy image instead of pure noise. As such, our method obtains significantly improved performance and reduced inference time compared with vanilla diffusion models. To make full use of the advantages of different intermediate steps, we further propose an adaptive residual layer that effectively screens out the side-effect in the iterative refinement when the intermediate results have been already well-exposed. The proposed framework can work with both real-paired datasets, SOTA noise models, and different backbone networks. Note that, the proposed framework is compatible with real-paired datasets, real/synthetic noise models, and different backbone networks. We evaluate the proposed method on various public benchmarks, achieving promising results with consistent improvements using different exposure models and backbones. Besides, the proposed method achieves better generalization capacity for unseen amplifying ratios and better performance than a larger feedforward neural model when few parameters are adopted.

Existing benchmarks measure capability -- whether a model succeeds on a single attempt -- but production deployments require reliability -- consistent success across repeated attempts on tasks of varying duration. We show these properties diverge systematically as task duration grows, and that pass@1 on short tasks is structurally blind to this divergence. We introduce a reliability science framework for long-horizon LLM agents with four metrics: Reliability Decay Curve (RDC), Variance Amplification Factor (VAF), Graceful Degradation Score (GDS), and Meltdown Onset Point (MOP). We evaluate 10 models across 23,392 episodes on a 396-task benchmark spanning four duration buckets and three domains. Key findings: (1) reliability decay is domain-stratified -- SE GDS drops from 0.90 to 0.44 while document processing is nearly flat (0.74 to 0.71); (2) VAF bifurcates by capability tier -- high VAF is a capability signature, not an instability signal; (3) capability and reliability rankings diverge substantially, with multi-rank inversions at long horizons; (4) frontier models have the highest meltdown rates (up to 19%) because they attempt ambitious multi-step strategies that sometimes spiral; and (5) memory scaffolds universally hurt long-horizon performance across all 10 models. These results motivate reliability as a first-class evaluation dimension alongside capability.

Single-image HDR reconstruction aims to recover high dynamic range radiance from a single low dynamic range (LDR) input, but remains highly ill-posed due to detail saturation in over-exposed regions and noise amplification in under-exposed areas. While recent diffusion-based approaches offer powerful generative priors, they often overlook the exposure-dependent nature of the degradation and incur substantial computational costs from iterative sampling. To address these challenges, we propose ExpoCM, a novel one-step generative HDR reconstruction framework that reformulates HDR reconstruction as a Probability Flow ODE (PF-ODE) and constructs exposure-aware consistency trajectories via exposure-dependent perturbations. Specifically, a soft exposure mask is first constructed to separate the LDR image into over-, under-, and well-exposed regions. Based on this partition, region-conditioned consistency trajectories are designed to hallucinate saturated details, suppress noise in dark regions, and preserve reliable structures within a single, distillation-free inference step. To further enhance perceptual quality, we introduce an Exposure-guided Luminance-Chromaticity Loss in the CIE~L^*a^*b^* space, which assigns exposure-aware weights to luminance and chromaticity components, effectively mitigating brightness bias and color drift. Extensive experiments on the HDR-REAL, HDR-EYE, and AIM2025 benchmarks demonstrate that ExpoCM achieves state-of-the-art fidelity and perceptual accuracy, while enabling over 400times and 20times faster inference compared to DDPM (1000 steps) and DDIM (50 steps), respectively.

Quantized checkpoints are often screened first with quality metrics and only later, if at all, with direct safety tests. This paper audits that shortcut on a matched 51-row matrix spanning 6 models, 4 families, a 7-level GGUF ladder, and AWQ/GPTQ INT4 checkpoints. In this matrix the shortcut fails: all 36 quality-safety pairings split direction across models, and 9 hidden-danger rows plus 1 near-hidden-danger row show quality stable or improved while refusal falls by 12-68 percentage points. Seven of the 11 AWQ/GPTQ rows are hidden-danger. A four-probe mechanistic follow-up over the 17 Hugging Face-backed FP16/AWQ/GPTQ cells does not rescue it: entropy, refusal-direction, and calibration probes are weak or null separators of dangerous rows, and although probe-identified safety-associated neurons absorb 1.39times more quantization error overall (p < 5 times 10^{-7}), the effect is not regime-specific. Claude Sonnet 4 relabels 11,470 items in a predefined stratified set, agrees with the primary gemma3:12b judge on 89.9\% of rows (κ= 0.873, 95\% CI [0.866, 0.881]), and changes 0/10 hidden-danger cells. A calibrated study-internal behavioral screen -- the Refusal Template Stability Index (RTSI), built from four refusal-template drift features and calibrated on this matrix -- routes 10/10 hidden- or near-hidden-danger rows to direct safety testing (Wilson 95\% CI lower bound 0.72) while leaving 23 of 45 non-baseline rows in a low-risk bucket under both in-sample scoring and row-level leave-one-out validation; on the same matrix, the best single-feature baselines (unique-prefix-rate-delta, raw refusal-rate delta) recover 9/10 and 8/10 respectively at matched bucket size, and cross-stack transfer requires recalibration. For the quantized checkpoints, model families, and safety outcomes studied here, retained quality cannot waive direct safety evaluation.

A pervasive intuition holds that vision-language models (VLMs) are most trustworthy when their attention maps look sharp: concentrated attention on the queried region should imply a confident, calibrated answer. We test this Attention-Confidence Assumption directly. We instrument three open-weight VLM families (LLaVA-1.5, PaliGemma, Qwen2-VL; 3-7B parameters) with a unified mechanistic pipeline -- the VLM Reliability Probe (VRP) -- that compares attention structure, generation dynamics, and hidden-state geometry against a single correctness label. Three results emerge. (i) Attention structure is a near-zero predictor of correctness (R_pb(C_k,y)=0.001, 95% CI [-0.034,0.036]; R_pb(H_s,y)=-0.012, [-0.047,0.024] on a pooled n=3,090 split), even though attention remains causally necessary for feature extraction (top-30% patch masking drops accuracy by 8.2-11.3 pp, p<0.001). (ii) Reliability becomes legible later in the computation: a single hidden-state linear probe reaches AUROC>0.95 on POPE for two of three families, and self-consistency at K=10 is the strongest behavioral predictor we measure at 10x inference cost (R_pb=0.43). (iii) Causal neuron-level ablations expose a sharp architectural split with direct monitor-design implications: late-fusion LLaVA concentrates reliability in a fragile late bottleneck (-8.3 pp object-identification accuracy after top-5 probe-neuron ablation), whereas early-fusion PaliGemma and Qwen2-VL distribute it widely and absorb destruction of ~50% of their peak-layer hidden dimension with <=1 pp degradation. The takeaway is narrow but consequential: in 3-7B VLMs, reliability is read more reliably off hidden-state geometry, layer-wise margin formation, and sparse late-layer circuits than off attention-map sharpness.

Single-prompt accuracy is the dominant way to benchmark language models, but it can miss reliability failures that matter. We evaluate a 15-model open-weight corpus, with the main reliability analyses focused on 10 instruct models across five classification and reasoning benchmarks under five prompt variants each, measuring accuracy, token-probability calibration, verbal-confidence calibration, verbal parse rate, and prompt-perturbation spread for every (model x dataset x variant) cell. We find three broad results. First, evaluation design can materially change the conclusion. Switching Expected Calibration Error (ECE) token from a raw to a label-set-normalised definition changes per-cell calibration by a mean absolute 0.149. More strikingly, pairing a chain-of-thought prompt with a first-character evaluator on ARC-Challenge reduces apparent accuracy by 72-88% across all five primary models; two independent repair procedures recover 93.8% and 102.7% of the lost performance, indicating an evaluator-side rather than model-side failure. Second, confidence signals are fragile. On MMLU-Pro, every primary model verbally reports confidence substantially above both its accuracy and its token-probability confidence on the same rows, and verbal parse rate can collapse for a single model on a single prompt variant. Third, prompt robustness does not track parameter count reliably. Across 10 instruct models, the correlation between model size and prompt-perturbation spread ranges from -0.244 to 0.474 across benchmarks. Taken together, these results show that reliability conclusions for small language models depend not only on the model being evaluated, but also on the evaluation pipeline used to measure it. We argue that calibration definitions, evaluator logic, verbal parseability, and prompt robustness should be reported explicitly when making reliability claims.

Hallucination, where models generate fluent text unsupported by visual evidence, remains a major flaw in vision-language models and is particularly critical in sign language translation (SLT). In SLT, meaning depends on precise grounding in video, and gloss-free models are especially vulnerable because they map continuous signer movements directly into natural language without intermediate gloss supervision that serves as alignment. We argue that hallucinations arise when models rely on language priors rather than visual input. To capture this, we propose a token-level reliability measure that quantifies how much the decoder uses visual information. Our method combines feature-based sensitivity, which measures internal changes when video is masked, with counterfactual signals, which capture probability differences between clean and altered video inputs. These signals are aggregated into a sentence-level reliability score, providing a compact and interpretable measure of visual grounding. We evaluate the proposed measure on two SLT benchmarks (PHOENIX-2014T and CSL-Daily) with both gloss-based and gloss-free models. Our results show that reliability predicts hallucination rates, generalizes across datasets and architectures, and decreases under visual degradations. Beyond these quantitative trends, we also find that reliability distinguishes grounded tokens from guessed ones, allowing risk estimation without references; when combined with text-based signals (confidence, perplexity, or entropy), it further improves hallucination risk estimation. Qualitative analysis highlights why gloss-free models are more susceptible to hallucinations. Taken together, our findings establish reliability as a practical and reusable tool for diagnosing hallucinations in SLT, and lay the groundwork for more robust hallucination detection in multimodal generation.

Quantifying sponsor visibility in sports broadcasts is a critical marketing task traditionally hindered by manual, subjective, and unscalable analysis methods. While automated systems offer an alternative, their reliance on axis-aligned Horizontal Bounding Box (HBB) leads to inaccurate exposuremetrics when logos appear rotated or skewed due to dynamic camera angles and perspective distortions. This paper introduces ExposureEngine, an end-to-end system designed for accurate, rotation-aware sponsor visibility analytics in sports broadcasts, demonstrated in a soccer case study. Our approach predicts Oriented Bounding Box (OBB) to provide a geometrically precise fit to each logo regardless of the orientation on-screen. To train and evaluate our detector, we developed a new dataset comprising 1,103 frames from Swedish elite soccer, featuring 670 unique sponsor logos annotated with OBBs. Our model achieves a mean Average Precision (mAP@0.5) of 0.859, with a precision of 0.96 and recall of 0.87, demonstrating robust performance in localizing logos under diverse broadcast conditions. The system integrates these detections into an analytical pipeline that calculates precise visibility metrics, such as exposure duration and on-screen coverage. Furthermore, we incorporate a language-driven agentic layer, enabling users to generate reports, summaries, and media content through natural language queries. The complete system, including the dataset and the analytics dashboard, provides a comprehensive solution for auditable and interpretable sponsor measurement in sports media. An overview of the ExposureEngine is available online: https://youtu.be/tRw6OBISuW4 .

Safety benchmark scores provide incomplete evidence of deployment readiness: aligned language models often adhere to rigid rules even when a situational update flips which action is safe. We term this failure brittle safety. To diagnose it, we introduce context-flip evaluation, testing 12 models across a safety benchmark (PacifAIst) and two commonsense controls using paired variants where the nominally safe action produces harm. Three findings emerge. First, brittle safety is safety-specific: all 12 models exhibit a safety-commonsense gap (mean +17.4 pp). Baseline accuracy fails to predict brittleness: among models above 90% baseline accuracy, brittleness rates range from 13.7% to 90.0%. Second, failures stem from policy override rather than miscomprehension: despite acknowledging the context change in every case, models persist via three distinct mechanisms that vary by update type and model family. Third, on a hand-audited probe of catastrophic consequence-flip scenarios, standard action-level guardrails catch none, while a state-aware validator catches all without false alarms on correct interventions. This indicates that action-level content moderation is systematically blind to consequence-flips, motivating state-aware architectural alternatives. We release our protocol, perturbed benchmarks, and deployment probe.

To generate evidence regarding the safety and efficacy of artificial intelligence (AI) enabled medical devices, AI models need to be evaluated on a diverse population of patient cases, some of which may not be readily available. We propose an evaluation approach for testing medical imaging AI models that relies on in silico imaging pipelines in which stochastic digital models of human anatomy (in object space) with and without pathology are imaged using a digital replica imaging acquisition system to generate realistic synthetic image datasets. Here, we release M-SYNTH, a dataset of cohorts with four breast fibroglandular density distributions imaged at different exposure levels using Monte Carlo x-ray simulations with the publicly available Virtual Imaging Clinical Trial for Regulatory Evaluation (VICTRE) toolkit. We utilize the synthetic dataset to analyze AI model performance and find that model performance decreases with increasing breast density and increases with higher mass density, as expected. As exposure levels decrease, AI model performance drops with the highest performance achieved at exposure levels lower than the nominal recommended dose for the breast type.

Diffusion Probabilistic Models (DPM) have shown remarkable efficacy in the synthesis of high-quality images. However, their inference process characteristically requires numerous, potentially hundreds, of iterative steps, which could exaggerate the problem of exposure bias due to the training and inference discrepancy. Previous work has attempted to mitigate this issue by perturbing inputs during training, which consequently mandates the retraining of the DPM. In this work, we conduct a systematic study of exposure bias in DPM and, intriguingly, we find that the exposure bias could be alleviated with a novel sampling method that we propose, without retraining the model. We empirically and theoretically show that, during inference, for each backward time step t and corresponding state x_t, there might exist another time step t_s which exhibits superior coupling with x_t. Based on this finding, we introduce a sampling method named Time-Shift Sampler. Our framework can be seamlessly integrated to existing sampling algorithms, such as DDPM, DDIM and other high-order solvers, inducing merely minimal additional computations. Experimental results show our method brings significant and consistent improvements in FID scores on different datasets and sampling methods. For example, integrating Time-Shift Sampler to F-PNDM yields a FID=3.88, achieving 44.49\% improvements as compared to F-PNDM, on CIFAR-10 with 10 sampling steps, which is more performant than the vanilla DDIM with 100 sampling steps. Our code is available at https://github.com/Mingxiao-Li/TS-DPM.

Frontier language models sometimes recognize that they are being evaluated and adjust their behavior, undermining validity of benchmark results. Yet the field studies it without a shared foundation, conflating properties of the evaluation with properties of the model, and detection with behavioral response. We ground evaluation awareness in social psychology, decomposing it into an environment component (how recognizable the task is) and a model component that separates recognition from propensity to act on it. We operationalize the environment component through eight categorized trigger factors, such as placeholder entities and grading-style output formats, and study recognition and behavior through chain-of-thought monitoring. Across nine frontier models and four benchmarks, recognition rates depend on the specific pairing of model and benchmark rather than on either in isolation. Recognition rarely leads to behavioral change, and when it does, the direction depends on the type of evaluation perceived. Models are also more sensitive to safety than capability evaluations, placing safety benchmark validity at greater risk. To study which factors each model is sensitive to and how they interact, we propose EvalAwareBench, a factor-controlled benchmark of 100 paired safety-capability tasks where each of the eight factors can be independently toggled, varying evaluative signals while holding the underlying request fixed. Through EvalAwareBench, we find that no single factor uniformly affects all models, but stacking factors progressively raises evaluation awareness across all of them. Our framework and EvalAwareBench provide the tools to measure, attribute, and mitigate evaluation awareness, pointing to behavioral consistency under recognition as a promising path forward.

Recent advances in Conditional Diffusion Models have led to substantial capabilities in various domains. However, understanding the impact of variations in the initial seed vector remains an underexplored area of concern. Particularly, latent-based diffusion models display inconsistencies in image generation under standard conditions when initialized with suboptimal initial seed vectors. To understand the impact of the initial seed vector on generated samples, we propose a reliability evaluation framework that evaluates the generated samples of a diffusion model when the initial seed vector is subjected to various synthetic shifts. Our results indicate that slight manipulations to the initial seed vector of the state-of-the-art Stable Diffusion (Rombach et al., 2022) can lead to significant disturbances in the generated samples, consequently creating images without the effect of conditioning variables. In contrast, GLIDE (Nichol et al., 2022) stands out in generating reliable samples even when the initial seed vector is transformed. Thus, our study sheds light on the importance of the selection and the impact of the initial seed vector in the latent-based diffusion model.

This paper introduces fourteen novel datasets for the evaluation of Large Language Models' safety in the context of enterprise tasks. A method was devised to evaluate a model's safety, as determined by its ability to follow instructions and output factual, unbiased, grounded, and appropriate content. In this research, we used OpenAI GPT as point of comparison since it excels at all levels of safety. On the open-source side, for smaller models, Meta Llama2 performs well at factuality and toxicity but has the highest propensity for hallucination. Mistral hallucinates the least but cannot handle toxicity well. It performs well in a dataset mixing several tasks and safety vectors in a narrow vertical domain. Gemma, the newly introduced open-source model based on Google Gemini, is generally balanced but trailing behind. When engaging in back-and-forth conversation (multi-turn prompts), we find that the safety of open-source models degrades significantly. Aside from OpenAI's GPT, Mistral is the only model that still performed well in multi-turn tests.

Text-to-image diffusion models, e.g. Stable Diffusion (SD), lately have shown remarkable ability in high-quality content generation, and become one of the representatives for the recent wave of transformative AI. Nevertheless, such advance comes with an intensifying concern about the misuse of this generative technology, especially for producing copyrighted or NSFW (i.e. not safe for work) images. Although efforts have been made to filter inappropriate images/prompts or remove undesirable concepts/styles via model fine-tuning, the reliability of these safety mechanisms against diversified problematic prompts remains largely unexplored. In this work, we propose Prompting4Debugging (P4D) as a debugging and red-teaming tool that automatically finds problematic prompts for diffusion models to test the reliability of a deployed safety mechanism. We demonstrate the efficacy of our P4D tool in uncovering new vulnerabilities of SD models with safety mechanisms. Particularly, our result shows that around half of prompts in existing safe prompting benchmarks which were originally considered "safe" can actually be manipulated to bypass many deployed safety mechanisms, including concept removal, negative prompt, and safety guidance. Our findings suggest that, without comprehensive testing, the evaluations on limited safe prompting benchmarks can lead to a false sense of safety for text-to-image models.

We study reliability in autonomous language-model agents that translate user mandates into validated tool actions under real capital. The setting is DX Terminal Pro, a 21-day deployment in which 3,505 user-funded agents traded real ETH in a bounded onchain market. Users configured vaults through structured controls and natural-language strategies, but only agents could choose normal buy/sell trades. The system produced 7.5M agent invocations, roughly 300K onchain actions, about $20M in volume, more than 5,000 ETH deployed, roughly 70B inference tokens, and 99.9% settlement success for policy-valid submitted transactions. Long-running agents accumulated thousands of sequential decisions, including 6,000+ prompt-state-action cycles for continuously active agents, yielding a large-scale trace from user mandate to rendered prompt, reasoning, validation, portfolio state, and settlement. Reliability did not come from the base model alone; it emerged from the operating layer around the model: prompt compilation, typed controls, policy validation, execution guards, memory design, and trace-level observability. Pre-launch testing exposed failures that text-only benchmarks rarely measure, including fabricated trading rules, fee paralysis, numeric anchoring, cadence trading, and misread tokenomics. Targeted harness changes reduced fabricated sell rules from 57% to 3%, reduced fee-led observations from 32.5% to below 10%, and increased capital deployment from 42.9% to 78.0% in an affected test population. We show that capital-managing agents should be evaluated across the full path from user mandate to prompt, validated action, and settlement.

Millions of individuals' well-being are challenged by the harms of substance use. Harm reduction as a public health strategy is designed to improve their health outcomes and reduce safety risks. Some large language models (LLMs) have demonstrated a decent level of medical knowledge, promising to address the information needs of people who use drugs (PWUD). However, their performance in relevant tasks remains largely unexplored. We introduce HRIPBench, a benchmark designed to evaluate LLM's accuracy and safety risks in harm reduction information provision. The benchmark dataset HRIP-Basic has 2,160 question-answer-evidence pairs. The scope covers three tasks: checking safety boundaries, providing quantitative values, and inferring polysubstance use risks. We build the Instruction and RAG schemes to evaluate model behaviours based on their inherent knowledge and the integration of domain knowledge. Our results indicate that state-of-the-art LLMs still struggle to provide accurate harm reduction information, and sometimes, carry out severe safety risks to PWUD. The use of LLMs in harm reduction contexts should be cautiously constrained to avoid inducing negative health outcomes. WARNING: This paper contains illicit content that potentially induces harms.

Reliable probability estimation is of crucial importance in many real-world applications where there is inherent (aleatoric) uncertainty. Probability-estimation models are trained on observed outcomes (e.g. whether it has rained or not, or whether a patient has died or not), because the ground-truth probabilities of the events of interest are typically unknown. The problem is therefore analogous to binary classification, with the difference that the objective is to estimate probabilities rather than predicting the specific outcome. This work investigates probability estimation from high-dimensional data using deep neural networks. There exist several methods to improve the probabilities generated by these models but they mostly focus on model (epistemic) uncertainty. For problems with inherent uncertainty, it is challenging to evaluate performance without access to ground-truth probabilities. To address this, we build a synthetic dataset to study and compare different computable metrics. We evaluate existing methods on the synthetic data as well as on three real-world probability estimation tasks, all of which involve inherent uncertainty: precipitation forecasting from radar images, predicting cancer patient survival from histopathology images, and predicting car crashes from dashcam videos. We also give a theoretical analysis of a model for high-dimensional probability estimation which reproduces several of the phenomena evinced in our experiments. Finally, we propose a new method for probability estimation using neural networks, which modifies the training process to promote output probabilities that are consistent with empirical probabilities computed from the data. The method outperforms existing approaches on most metrics on the simulated as well as real-world data.

Existing image contrast enhancement methods are typically designed for specific tasks such as under-/over-exposure correction, low-light and backlit image enhancement, etc. The learned models, however, exhibit poor generalization performance across different tasks, even across different datasets of a specific task. It is important to explore whether we can learn a universal and generalized model for various contrast enhancement tasks. In this work, we observe that the common key factor of these tasks lies in the need of exposure and contrast adjustment, which can be well-addressed if high-dynamic range (HDR) inputs are available. We hence collect 46,928 HDR raw images from public sources, and render 328,496 sRGB images to build multi-exposure sequences (MES) and the corresponding pseudo sRGB ground-truths via multi-exposure fusion. Consequently, we train a network to generate an MES from a single sRGB image, followed by training another network to fuse the generated MES into an enhanced image. Our proposed method, namely UNiversal Image Contrast Enhancer (UNICE), is free of costly human labeling. However, it demonstrates significantly stronger generalization performance than existing image contrast enhancement methods across and within different tasks, even outperforming manually created ground-truths in multiple no-reference image quality metrics. The dataset, code and model are available at https://github.com/BeyondHeaven/UNICE.

Text-to-image (T2I) models have rapidly advanced, enabling the generation of high-quality images from text prompts across various domains. However, these models present notable safety concerns, including the risk of generating harmful, biased, or private content. Current research on assessing T2I safety remains in its early stages. While some efforts have been made to evaluate models on specific safety dimensions, many critical risks remain unexplored. To address this gap, we introduce T2ISafety, a safety benchmark that evaluates T2I models across three key domains: toxicity, fairness, and bias. We build a detailed hierarchy of 12 tasks and 44 categories based on these three domains, and meticulously collect 70K corresponding prompts. Based on this taxonomy and prompt set, we build a large-scale T2I dataset with 68K manually annotated images and train an evaluator capable of detecting critical risks that previous work has failed to identify, including risks that even ultra-large proprietary models like GPTs cannot correctly detect. We evaluate 12 prominent diffusion models on T2ISafety and reveal several concerns including persistent issues with racial fairness, a tendency to generate toxic content, and significant variation in privacy protection across the models, even with defense methods like concept erasing. Data and evaluator are released under https://github.com/adwardlee/t2i_safety.

Existing benchmarks for tool-using LLM agents primarily report single-run success rates and miss reliability properties required in production. We introduce ReliabilityBench, a benchmark for evaluating agent reliability across three dimensions: (i) consistency under repeated execution using pass^k, (ii) robustness to semantically equivalent task perturbations at intensity ε, and (iii) fault tolerance under controlled tool/API failures at intensity λ. ReliabilityBench contributes a unified reliability surface R(k,ε,λ), action metamorphic relations that define correctness via end-state equivalence rather than text similarity, and a chaos-engineering-style fault injection framework (timeouts, rate limits, partial responses, schema drift). We evaluate two models (Gemini 2.0 Flash, GPT-4o) and two agent architectures (ReAct, Reflexion) across four domains (scheduling, travel, customer support, e-commerce) over 1,280 episodes. Perturbations alone reduce success from 96.9% at ε=0 to 88.1% at ε=0.2. Rate limiting is the most damaging fault in ablations. ReAct is more robust than Reflexion under combined stress, and Gemini 2.0 Flash achieves comparable reliability to GPT-4o at much lower cost. ReliabilityBench provides a systematic framework for assessing production readiness of LLM agents.

In this paper, we present a dataset of 713k articles collected between 02/2018-11/2018. These articles are collected directly from 194 news and media outlets including mainstream, hyper-partisan, and conspiracy sources. We incorporate ground truth ratings of the sources from 8 different assessment sites covering multiple dimensions of veracity, including reliability, bias, transparency, adherence to journalistic standards, and consumer trust. The NELA-GT-2018 dataset can be found at https://doi.org/10.7910/DVN/ULHLCB.

Robustness is a long-overlooked problem in deepfake detection. However, detection performance is nearly worthless in the real world if it suffers under exposure to even slight image degradation. In addition to weaker degradations that can accidentally occur in the image processing pipeline, there is another risk of malicious deepfakes that specifically introduce degradations, purposefully exploiting the detector's weaknesses in that regard. Here, we present an overview of the NTIRE 2026 Robust Deepfake Detection Challenge, which specifically addresses that problem. Participants were tasked with building a detector that would later be tested on an unknown test-set, which included both common and uncommon degradations of various strengths. With a total number of 337 participants and 57 submissions to the final leaderboard, the first edition of the challenge was well received. To ensure the reliability of the results, participants were given only 24h to complete the test run with no labels provided, limiting the possibility of training on the test data. Furthermore, the top solutions were scored on a private test-set to detect any such overfitting. This report presents the competition setting, dataset preparation, as well as details and performance of methods. Top methods rely on large foundation models, ensembles, and degradation training to combine generality and robustness.

This paper studies the training-testing discrepancy (a.k.a. exposure bias) problem for improving the diffusion models. During training, the input of a prediction network at one training timestep is the corresponding ground-truth noisy data that is an interpolation of the noise and the data, and during testing, the input is the generated noisy data. We present a novel training approach, named MixFlow, for improving the performance. Our approach is motivated by the Slow Flow phenomenon: the ground-truth interpolation that is the nearest to the generated noisy data at a given sampling timestep is observed to correspond to a higher-noise timestep (termed slowed timestep), i.e., the corresponding ground-truth timestep is slower than the sampling timestep. MixFlow leverages the interpolations at the slowed timesteps, named slowed interpolation mixture, for post-training the prediction network for each training timestep. Experiments over class-conditional image generation (including SiT, REPA, and RAE) and text-to-image generation validate the effectiveness of our approach. Our approach MixFlow over the RAE models achieve strong generation results on ImageNet: 1.43 FID (without guidance) and 1.10 (with guidance) at 256 x 256, and 1.55 FID (without guidance) and 1.10 (with guidance) at 512 x 512.

Although AI systems have been applied in various fields and achieved impressive performance, their safety and reliability are still a big concern. This is especially important for safety-critical tasks. One shared characteristic of these critical tasks is their risk sensitivity, where small mistakes can cause big consequences and even endanger life. There are several factors that could be guidelines for the successful deployment of AI systems in sensitive tasks: (i) failure detection and out-of-distribution (OOD) detection; (ii) overfitting identification; (iii) uncertainty quantification for predictions; (iv) robustness to data perturbations. These factors are also challenges of current AI systems, which are major blocks for building safe and reliable AI. Specifically, the current AI algorithms are unable to identify common causes for failure detection. Furthermore, additional techniques are required to quantify the quality of predictions. All these contribute to inaccurate uncertainty quantification, which lowers trust in predictions. Hence obtaining accurate model uncertainty quantification and its further improvement are challenging. To address these issues, many techniques have been proposed, such as regularization methods and learning strategies. As vision and language are the most typical data type and have many open source benchmark datasets, this thesis will focus on vision-language data processing for tasks like classification, image captioning, and vision question answering. In this thesis, we aim to build a safeguard by further developing current techniques to ensure the accurate model uncertainty for safety-critical tasks.

Predicting mortality-related outcomes from images offers the prospect of accessible, noninvasive, and scalable health screening. We present a method that leverages pretrained vision transformer foundation models to estimate remaining lifespan from facial and whole-body images, alongside robust uncertainty quantification. We show that predictive uncertainty varies systematically with the true remaining lifespan, and that this uncertainty can be effectively modeled by learning a Gaussian distribution for each sample. Our approach achieves state-of-the-art mean absolute error (MAE) of 7.48 years on an established Dataset, and further improves to 4.79 and 5.07 years MAE on two new, higher-quality datasets curated and published in this work. Importantly, our models provide well-calibrated uncertainty estimates, as demonstrated by a bucketed expected calibration error of 0.62 years. While not intended for clinical deployment, these results highlight the potential of extracting medically relevant signals from images. We make all code and datasets available to facilitate further research.

Search-augmented LLMs increasingly mediate everyday consumer recommendations by retrieving live web content. This creates a new risk: generative recommenders may consume polluted web content, such as fake reviews and promotional pages crafted to mislead recommendations. We ask: to what extent do search-augmented LLMs become unwitting promoters of fake products when consuming polluted retrieval results? To answer this, we introduce FORGE (Fake Online Recommendations in Generative Environments), a benchmark for measuring fake-product promotion under controlled web-content pollution. Given an upstream search result, FORGE locally rewrites real products in retrieved web pages into fake ones to simulate web-content pollution, and measures how often the LLM recommends the fake product. FORGE covers 225 real-world products across 15 categories and 5 consumer scenarios. Across 12 commercial and open-weights LLMs, all models are vulnerable: a single polluted page yields fooled rates of up to 27%, while the full top-3 replacement raises this to 73.8%. Vulnerability varies substantially across categories, increasing when models lack stable prior knowledge of the relevant products. Reasoning does not mitigate this vulnerability; instead, it often generates spurious social proof to justify false recommendations. We evaluate three defenses: skepticism prompting and consensus filtering (over model priors or cross-document evidence). Skepticism can exacerbate vulnerability, much like reasoning, while filtering risks suppressing legitimate products. We release FORGE at https://github.com/leoluolol/forge-benchmark.

When an LLM agent reads a confidential file, then writes a summary, then emails it externally, no single step is unsafe, but the sequence is a data leak. We call this safety drift: individually safe actions compounding into violations. Prior work has measured this problem; we predict it. SafetyDrift models agent safety trajectories as absorbing Markov chains, computing the probability that a trajectory will reach a violation within a given number of steps via closed form absorption analysis. A consequence of the monotonic state design is that every agent will eventually violate safety if left unsupervised (absorption probability 1.0 from all states), making the practical question not if but when, and motivating our focus on finite horizon prediction. Across 357 traces spanning 40 realistic tasks in four categories, we discover that "points of no return" are sharply task dependent: in communication tasks, agents that reach even a mild risk state have an 85% chance of violating safety within five steps, while in technical tasks the probability stays below 5% from any state. A lightweight monitor built on these models detects 94.7% of violations with 3.7 steps of advance warning at negligible computational cost, outperforming both keyword matching (44.7% detection, 55.9% false positive rate) and per step LLM judges (52.6% detection, 38.2% false positive rate) while running over 60,000x faster.

Perception of toxicity evolves over time and often differs between geographies and cultural backgrounds. Similarly, black-box commercially available APIs for detecting toxicity, such as the Perspective API, are not static, but frequently retrained to address any unattended weaknesses and biases. We evaluate the implications of these changes on the reproducibility of findings that compare the relative merits of models and methods that aim to curb toxicity. Our findings suggest that research that relied on inherited automatic toxicity scores to compare models and techniques may have resulted in inaccurate findings. Rescoring all models from HELM, a widely respected living benchmark, for toxicity with the recent version of the API led to a different ranking of widely used foundation models. We suggest caution in applying apples-to-apples comparisons between studies and lay recommendations for a more structured approach to evaluating toxicity over time. Code and data are available at https://github.com/for-ai/black-box-api-challenges.

Reliable application of machine learning is of primary importance to the practical deployment of deep learning methods. A fundamental challenge is that models are often unreliable due to overconfidence. In this paper, we estimate a model's reliability by measuring the agreement between its latent space, and the latent space of a foundation model. However, it is challenging to measure the agreement between two different latent spaces due to their incoherence, \eg, arbitrary rotations and different dimensionality. To overcome this incoherence issue, we design a neighborhood agreement measure between latent spaces and find that this agreement is surprisingly well-correlated with the reliability of a model's predictions. Further, we show that fusing neighborhood agreement into a model's predictive confidence in a post-hoc way significantly improves its reliability. Theoretical analysis and extensive experiments on failure detection across various datasets verify the effectiveness of our method on both in-distribution and out-of-distribution settings.

Capturing real world lighting is a long standing challenge in imaging and most practical methods acquire High Dynamic Range (HDR) images by either fusing multiple exposures, or boosting the dynamic range of Standard Dynamic Range (SDR) images. Multiple exposure capture is problematic as it requires longer capture times which can often lead to ghosting problems. The main alternative, inverse tone mapping is an ill-defined problem that is especially challenging as single captured exposures usually contain clipped and quantized values, and are therefore missing substantial amounts of content. To alleviate this, we propose a new approach, High Dynamic Range Thermal (HDRT), for HDR acquisition using a separate, commonly available, thermal infrared (IR) sensor. We propose a novel deep neural method (HDRTNet) which combines IR and SDR content to generate HDR images. HDRTNet learns to exploit IR features linked to the RGB image and the IR-specific parameters are subsequently used in a dual branch method that fuses features at shallow layers. This produces an HDR image that is significantly superior to that generated using naive fusion approaches. To validate our method, we have created the first HDR and thermal dataset, and performed extensive experiments comparing HDRTNet with the state-of-the-art. We show substantial quantitative and qualitative quality improvements on both over- and under-exposed images, showing that our approach is robust to capturing in multiple different lighting conditions.

Language models are increasingly capable and are being rapidly deployed on a population-level scale. As a result, the safety of these models is increasingly high-stakes. Fortunately, advances in alignment have significantly reduced the likelihood of harmful model outputs. However, when models are queried billions of times in a day, even rare worst-case behaviors will occur. Current safety evaluations focus on capturing the distribution of inputs that yield harmful outputs. These evaluations disregard the probabilistic nature of models and their tail output behavior. To measure this tail risk, we propose a method to efficiently estimate the probability of harmful outputs for any input query. Instead of naive brute-force sampling from the target model, where harmful outputs could be rare, we operationalize importance sampling by creating unsafe versions of the target model. These unsafe versions enable sample-efficient estimation by making harmful outputs more probable. On benchmarks measuring misuse and misalignment, these estimates match brute-force Monte Carlo estimates using 10-20x fewer samples. For example, we can estimate probability of harmful outputs on the order of 10^-4 with just 500 samples. Additionally, we find that these harmfulness estimates can reveal the sensitivity of models to perturbations in model input and predict deployment risks. Our work demonstrates that accurate rare-event estimation is both critical and feasible for safety evaluations. Code is available at https://github.com/rangell/LMTailRisk

Medical vision-language models report strong chest radiograph accuracy, and this is increasingly read as evidence that they use the image. That inference is unsafe: a model exploiting finding-name priors scores like one that reads the scan, and no standard benchmark separates them. We introduce a causal audit that intervenes on the image, occluding the relevant region, occluding an irrelevant one, and swapping in another patient's same-label scan, and combines three behavioral metrics to test whether a correct answer depends on the image. Across nine systems, a text-only model with no image access reaches within 5.7 accuracy points of the best multimodal one, and a 119-billion-parameter multimodal model is statistically indistinguishable from a 7-billion text-only baseline. The audit splits the cohort into three models that ignore the image, one that is unstable, and five that use it selectively, for a subset of findings; the categories hold across a second dataset, resolution, and prompt phrasing. Against board-certified radiologists, a text-only model is statistically indistinguishable from a radiologist's accuracy while grounding at zero, whereas the image-using models ground at radiologist-comparable rates. Reported confidence flags ungrounded answers only when a model uses the image. Grounding audits, not accuracy, should gate clinical deployment.

Content moderation systems classify images as safe or unsafe but lack spatial grounding and interpretability: they cannot explain what sensitive behavior was detected, who is involved, or where it occurs. We introduce the Sensitive Benchmark (SenBen), the first large-scale scene graph benchmark for sensitive content, comprising 13,999 frames from 157 movies annotated with Visual Genome-style scene graphs (25 object classes, 28 attributes including affective states such as pain, fear, aggression, and distress, 14 predicates) and 16 sensitivity tags across 5 categories. We distill a frontier VLM into a compact 241M student model using a multi-task recipe that addresses vocabulary imbalance in autoregressive scene graph generation through suffix-based object identity, Vocabulary-Aware Recall (VAR) Loss, and a decoupled Query2Label tag head with asymmetric loss, yielding a +6.4 percentage point improvement in SenBen Recall over standard cross-entropy training. On grounded scene graph metrics, our student model outperforms all evaluated VLMs except Gemini models and all commercial safety APIs, while achieving the highest object detection and captioning scores across all models, at 7.6times faster inference and 16times less GPU memory.

Radiation therapy (RT) requires precise dose delivery over multiple fractions, with CT fundamental for treatment planning due to its electron density information. Repeated CT acquisitions impose radiation exposure and logistical burdens, MRI lacks electron density, and cone-beam CT (CBCT) requires correction for dose calculation. Synthetic CT (sCT) generation addresses these by converting MRI or CBCT into CT-equivalent images with accurate Hounsfield Unit (HU) values, enabling MRI-only RT and CBCT-based adaptive workflows. Building on SynthRAD2023, SynthRAD2025 benchmarked sCT methods on 2,362 patients from five European centers across head and neck, thorax, and abdomen. Two tasks: MRI-to-CT (890 cases) and CBCT-to-CT (1,472 cases), evaluated via image similarity (MAE, PSNR, MS-SSIM), segmentation (Dice, HD95), and dosimetric metrics from photon and proton plans. With 803 participants and 12/13 valid submissions, Task 1 top performance reached MAE 64.8pm21.3 HU, PSNR sim30 dB, MS-SSIM sim0.936, Dice 0.79, photon γ_{2%/2mm}>98%, proton γapprox85%. Task 2 improved: MAE 48.3pm13.4 HU, PSNR 32.6 dB, MS-SSIM 0.968, Dice 0.86, photon γ>99%, proton γapprox89%. Strong image--segmentation correlations (ρ=0.78--0.79) but moderate dose correlations confirmed image quality is insufficient as a dosimetric surrogate. Head-and-neck cases were most consistent; thoracic and abdominal cases showed greater variability. Residual errors at tissue interfaces propagate along beam paths, affecting proton dose more than photon. SynthRAD2025 demonstrates that deep learning yields clinically relevant sCTs, especially for CBCT-to-CT, while identifying persistent MRI-to-CT challenges and underscoring dose-based evaluation as essential for clinical validation.

In the future, powerful AI systems may be deployed in high-stakes settings, where a single failure could be catastrophic. One technique for improving AI safety in high-stakes settings is adversarial training, which uses an adversary to generate examples to train on in order to achieve better worst-case performance. In this work, we used a safe language generation task (``avoid injuries'') as a testbed for achieving high reliability through adversarial training. We created a series of adversarial training techniques -- including a tool that assists human adversaries -- to find and eliminate failures in a classifier that filters text completions suggested by a generator. In our task, we determined that we can set very conservative classifier thresholds without significantly impacting the quality of the filtered outputs. We found that adversarial training increased robustness to the adversarial attacks that we trained on -- doubling the time for our contractors to find adversarial examples both with our tool (from 13 to 26 minutes) and without (from 20 to 44 minutes) -- without affecting in-distribution performance. We hope to see further work in the high-stakes reliability setting, including more powerful tools for enhancing human adversaries and better ways to measure high levels of reliability, until we can confidently rule out the possibility of catastrophic deployment-time failures of powerful models.

Large language models (LLMs) are routinely used by physicians and patients for medical advice, yet their clinical safety profiles remain poorly characterized. We present NOHARM (Numerous Options Harm Assessment for Risk in Medicine), a benchmark using 100 real primary care-to-specialist consultation cases to measure frequency and severity of harm from LLM-generated medical recommendations. NOHARM covers 10 specialties, with 12,747 expert annotations for 4,249 clinical management options. Across 31 LLMs, potential for severe harm from LLM recommendations occurs in up to 22.2% (95% CI 21.6-22.8%) of cases, with harm of omission accounting for 76.6% (95% CI 76.4-76.8%) of errors. Safety performance is only moderately correlated (r = 0.61-0.64) with existing AI and medical knowledge benchmarks. The best models outperform generalist physicians on safety (mean difference 9.7%, 95% CI 7.0-12.5%), and a diverse multi-agent approach improves safety compared to solo models (mean difference 8.0%, 95% CI 4.0-12.1%). Therefore, despite strong performance on existing evaluations, widely used AI models can produce severely harmful medical advice at nontrivial rates, underscoring clinical safety as a distinct performance dimension necessitating explicit measurement.

Qualitative research faces a critical reliability challenge: traditional inter-rater agreement methods require multiple human coders, are time-intensive, and often yield moderate consistency. We present a multi-perspective validation framework for LLM-based thematic analysis that combines ensemble validation with dual reliability metrics: Cohen's Kappa (κ) for inter-rater agreement and cosine similarity for semantic consistency. Our framework enables configurable analysis parameters (1-6 seeds, temperature 0.0-2.0), supports custom prompt structures with variable substitution, and provides consensus theme extraction across any JSON format. As proof-of-concept, we evaluate three leading LLMs (Gemini 2.5 Pro, GPT-4o, Claude 3.5 Sonnet) on a psychedelic art therapy interview transcript, conducting six independent runs per model. Results demonstrate Gemini achieves highest reliability (κ= 0.907, cosine=95.3%), followed by GPT-4o (κ= 0.853, cosine=92.6%) and Claude (κ= 0.842, cosine=92.1%). All three models achieve a high agreement (κ> 0.80), validating the multi-run ensemble approach. The framework successfully extracts consensus themes across runs, with Gemini identifying 6 consensus themes (50-83% consistency), GPT-4o identifying 5 themes, and Claude 4 themes. Our open-source implementation provides researchers with transparent reliability metrics, flexible configuration, and structure-agnostic consensus extraction, establishing methodological foundations for reliable AI-assisted qualitative research.

This work addresses the challenge of high-quality surface normal estimation from monocular colored inputs (i.e., images and videos), a field which has recently been revolutionized by repurposing diffusion priors. However, previous attempts still struggle with stochastic inference, conflicting with the deterministic nature of the Image2Normal task, and costly ensembling step, which slows down the estimation process. Our method, StableNormal, mitigates the stochasticity of the diffusion process by reducing inference variance, thus producing "Stable-and-Sharp" normal estimates without any additional ensembling process. StableNormal works robustly under challenging imaging conditions, such as extreme lighting, blurring, and low quality. It is also robust against transparent and reflective surfaces, as well as cluttered scenes with numerous objects. Specifically, StableNormal employs a coarse-to-fine strategy, which starts with a one-step normal estimator (YOSO) to derive an initial normal guess, that is relatively coarse but reliable, then followed by a semantic-guided refinement process (SG-DRN) that refines the normals to recover geometric details. The effectiveness of StableNormal is demonstrated through competitive performance in standard datasets such as DIODE-indoor, iBims, ScannetV2 and NYUv2, and also in various downstream tasks, such as surface reconstruction and normal enhancement. These results evidence that StableNormal retains both the "stability" and "sharpness" for accurate normal estimation. StableNormal represents a baby attempt to repurpose diffusion priors for deterministic estimation. To democratize this, code and models have been publicly available in hf.co/Stable-X

The training of modern large language models (LLMs) takes place in a regime where most training examples are seen only a few times by the model during the course of training. What does a model remember about such examples seen only a few times during training and how long does that memory persist in the face of continuous training with new examples? Here, we investigate these questions through simple recognition, recall, and retention experiments with LLMs. In recognition experiments, we ask if the model can distinguish the seen example from a novel example; in recall experiments, we ask if the model can correctly recall the seen example when cued by a part of it; and in retention experiments, we periodically probe the model's memory for the original examples as the model is trained continuously with new examples. We find that a single exposure is generally sufficient for a model to achieve near perfect accuracy even in very challenging recognition experiments. We estimate that the recognition performance of even small language models easily exceeds human recognition performance reported in similar experiments with humans (Shepard, 1967). Achieving near perfect recall takes more exposures, but most models can do it in just 3 exposures. The flip side of this remarkable capacity for fast learning is that precise memories are quickly overwritten: recall performance for the original examples drops steeply over the first 10 training updates with new examples, followed by a more gradual decline. Even after 100K updates, however, some of the original examples are still recalled near perfectly. A qualitatively similar retention pattern has been observed in human long-term memory retention studies before (Bahrick, 1984). Finally, recognition is much more robust to interference than recall and memory for natural language sentences is generally superior to memory for stimuli without structure.

Deep learning is commonly used to reconstruct HDR images from LDR images. LDR stack-based methods are used for single-image HDR reconstruction, generating an HDR image from a deep learning-generated LDR stack. However, current methods generate the stack with predetermined exposure values (EVs), which may limit the quality of HDR reconstruction. To address this, we propose the continuous exposure value representation (CEVR), which uses an implicit function to generate LDR images with arbitrary EVs, including those unseen during training. Our approach generates a continuous stack with more images containing diverse EVs, significantly improving HDR reconstruction. We use a cycle training strategy to supervise the model in generating continuous EV LDR images without corresponding ground truths. Our CEVR model outperforms existing methods, as demonstrated by experimental results.

When a phone-use agent avoids harm, does that show safety, or simply inability to act? Existing evaluations often cannot tell. A harmful outcome may be avoided because the agent recognized the risk and chose the safe action, or because it failed to understand the screen or execute any relevant action at all. These cases have different causes and call for different fixes, yet current benchmarks often merge them under task success, refusal, or final harmful outcome. We address this problem with PhoneSafety, a benchmark of 700 safety-critical moments drawn from real phone interactions across more than 130 apps. Each instance isolates the next decision at a risky moment and asks a simple question: does the model take the safe action, take the unsafe action, or fail to do anything useful? We evaluate eight representative phone-use agents under this framework. Our results reveal two main patterns. First, stronger general phone-use ability does not reliably imply safer choices at risky moments. Models that perform better on ordinary app tasks are not always the ones that behave more safely when the next action matters. Second, failures to do anything useful behave like a capability signal rather than a safety signal: they are concentrated in more visually and operationally demanding settings and remain stable when the evaluation protocol changes. Across models, failures split into two recurring patterns: unsafe choices in settings where the model can act but chooses wrongly, and inability to act in more visually and operationally demanding screens. Overall, a harmless outcome is not enough to count as evidence of safety. Evaluating phone-use agents requires separating unsafe judgment from inability to act.

Advanced text-to-image models such as DALL-E 2 and Midjourney possess the capacity to generate highly realistic images, raising significant concerns regarding the potential proliferation of unsafe content. This includes adult, violent, or deceptive imagery of political figures. Despite claims of rigorous safety mechanisms implemented in these models to restrict the generation of not-safe-for-work (NSFW) content, we successfully devise and exhibit the first prompt attacks on Midjourney, resulting in the production of abundant photorealistic NSFW images. We reveal the fundamental principles of such prompt attacks and suggest strategically substituting high-risk sections within a suspect prompt to evade closed-source safety measures. Our novel framework, SurrogatePrompt, systematically generates attack prompts, utilizing large language models, image-to-text, and image-to-image modules to automate attack prompt creation at scale. Evaluation results disclose an 88% success rate in bypassing Midjourney's proprietary safety filter with our attack prompts, leading to the generation of counterfeit images depicting political figures in violent scenarios. Both subjective and objective assessments validate that the images generated from our attack prompts present considerable safety hazards.

LLMs are highly sensitive to prompt phrasing, yet standard benchmarks typically report performance using a single prompt, raising concerns about the reliability of such evaluations. In this work, we argue for a stochastic method of moments evaluation over the space of meaning-preserving prompt perturbations. We introduce a formal definition of reliable evaluation that accounts for prompt sensitivity, and suggest ReliableEval - a method for estimating the number of prompt resamplings needed to obtain meaningful results. Using our framework, we stochastically evaluate five frontier LLMs and find that even top-performing models like GPT-4o and Claude-3.7-Sonnet exhibit substantial prompt sensitivity. Our approach is model-, task-, and metric-agnostic, offering a recipe for meaningful and robust LLM evaluation.

Agentic retrieval-augmented reasoning pipelines are increasingly used to structure how large language models (LLMs) incorporate external evidence in clinical decision support. These systems iteratively retrieve curated domain knowledge and synthesize it into structured reports before answer selection. Although such pipelines can improve performance, their impact on reliability under model variability remains unclear. In real-world deployment, heterogeneous models may align, diverge, or synchronize errors in ways not captured by accuracy. We evaluated 34 LLMs on 169 expert-curated publicly available radiology questions, comparing zero-shot inference with a radiology-specific multi-step agentic retrieval condition in which all models received identical structured evidence reports derived from curated radiology knowledge. Agentic inference reduced inter-model decision dispersion (median entropy 0.48 vs. 0.13) and increased robustness of correctness across models (mean 0.74 vs. 0.81). Majority consensus also increased overall (P<0.001). Consensus strength and robust correctness remained correlated under both strategies (ho=0.88 for zero-shot; ho=0.87 for agentic), although high agreement did not guarantee correctness. Response verbosity showed no meaningful association with correctness. Among 572 incorrect outputs, 72% were associated with moderate or high clinically assessed severity, although inter-rater agreement was low (appa=0.02). Agentic retrieval therefore was associated with more concentrated decision distributions, stronger consensus, and higher cross-model robustness of correctness. These findings suggest that evaluating agentic systems through accuracy or agreement alone may not always be sufficient, and that complementary analyses of stability, cross-model robustness, and potential clinical impact are needed to characterize reliability under model variability.

The ecological validity of soundscape studies usually rests on a choice of soundscapes that are representative of the perceptual space under investigation. For example, a soundscape pleasantness study might investigate locations with soundscapes ranging from "pleasant" to "annoying". The choice of soundscapes is typically researcher-led, but a participant-led process can reduce selection bias and improve result reliability. Hence, we propose a robust participant-led method to pinpoint characteristic soundscapes possessing arbitrary perceptual attributes. We validate our method by identifying Singaporean soundscapes spanning the perceptual quadrants generated from the "Pleasantness" and "Eventfulness" axes of the ISO 12913-2 circumplex model of soundscape perception, as perceived by local experts. From memory and experience, 67 participants first selected locations corresponding to each perceptual quadrant in each major planning region of Singapore. We then performed weighted k-means clustering on the selected locations, with weights for each location derived from previous frequencies and durations spent in each location by each participant. Weights hence acted as proxies for participant confidence. In total, 62 locations were thereby identified as suitable locations with characteristic soundscapes for further research utilizing the ISO 12913-2 perceptual quadrants. Audio-visual recordings and acoustic characterization of the soundscapes will be made in a future study.

Clinical LLMs are often scaled by increasing model size, context length, retrieval complexity, or inference-time compute, with the implicit expectation that higher accuracy implies safer behavior. This assumption is incomplete in medicine, where a few confident, high-risk, or evidence-contradicting errors can matter more than average benchmark performance. We introduce SaFE-Scale, a framework for measuring how clinical LLM safety changes across model scale, evidence quality, retrieval strategy, context exposure, and inference-time compute. To instantiate this framework, we introduce RadSaFE-200, a Radiology Safety-Focused Evaluation benchmark of 200 multiple-choice questions with clinician-defined clean evidence, conflict evidence, and option-level labels for high-risk error, unsafe answer, and evidence contradiction. We evaluated 34 locally deployed LLMs across six deployment conditions: closed-book prompting (zero-shot), clean evidence, conflict evidence, standard RAG, agentic RAG, and max-context prompting. Clean evidence produced the strongest improvement, increasing mean accuracy from 73.5% to 94.1%, while reducing high-risk error from 12.0% to 2.6%, contradiction from 12.7% to 2.3%, and dangerous overconfidence from 8.0% to 1.6%. Standard RAG and agentic RAG did not reproduce this safety profile: agentic RAG improved accuracy over standard RAG and reduced contradiction, but high-risk error and dangerous overconfidence remained elevated. Max-context prompting increased latency without closing the safety gap, and additional inference-time compute produced only limited gains. Worst-case analysis showed that clinically consequential errors concentrated in a small subset of questions. Clinical LLM safety is therefore not a passive consequence of scaling, but a deployment property shaped by evidence quality, retrieval design, context construction, and collective failure behavior.

Recent advances in Large Language Models (LLMs) have sparked concerns over their potential to acquire and misuse dangerous or high-risk capabilities, posing frontier risks. Current safety evaluations primarily test for what a model can do - its capabilities - without assessing what it would do if endowed with high-risk capabilities. This leaves a critical blind spot: models may strategically conceal capabilities or rapidly acquire them, while harboring latent inclinations toward misuse. We argue that propensity - the likelihood of a model to pursue harmful actions if empowered - is a critical, yet underexplored, axis of safety evaluation. We present PropensityBench, a novel benchmark framework that assesses the proclivity of models to engage in risky behaviors when equipped with simulated dangerous capabilities using proxy tools. Our framework includes 5,874 scenarios with 6,648 tools spanning four high-risk domains: cybersecurity, self-proliferation, biosecurity, and chemical security. We simulate access to powerful capabilities via a controlled agentic environment and evaluate the models' choices under varying operational pressures that reflect real-world constraints or incentives models may encounter, such as resource scarcity or gaining more autonomy. Across open-source and proprietary frontier models, we uncover 9 alarming signs of propensity: models frequently choose high-risk tools when under pressure, despite lacking the capability to execute such actions unaided. These findings call for a shift from static capability audits toward dynamic propensity assessments as a prerequisite for deploying frontier AI systems safely. Our code is available at https://github.com/scaleapi/propensity-evaluation.

For deploying foundation models, practitioners increasingly need prescriptive scaling laws: given a pre training compute budget, what downstream accuracy is attainable with contemporary post training practice, and how stable is that mapping as the field evolves? Using large scale observational evaluations with 5k observational and 2k newly sampled data on model performance, we estimate capability boundaries, high conditional quantiles of benchmark scores as a function of log pre training FLOPs, via smoothed quantile regression with a monotone, saturating sigmoid parameterization. We validate the temporal reliability by fitting on earlier model generations and evaluating on later releases. Across various tasks, the estimated boundaries are mostly stable, with the exception of math reasoning that exhibits a consistently advancing boundary over time. We then extend our approach to analyze task dependent saturation and to probe contamination related shifts on math reasoning tasks. Finally, we introduce an efficient algorithm that recovers near full data frontiers using roughly 20% of evaluation budget. Together, our work releases the Proteus 2k, the latest model performance evaluation dataset, and introduces a practical methodology for translating compute budgets into reliable performance expectations and for monitoring when capability boundaries shift across time.

Machine unlearning in Vision-Language Models (VLMs) is required for compliance with the General Data Protection Regulation (GDPR), yet current evaluation practices are inconsistent. We present the first systematic study of metric reliability in multimodal unlearning. Five standard metrics, Forget Accuracy (FA), Retain Accuracy (RA), Membership Inference Attack (MIA), Activation Distance (AD), and JS divergence (JS), yield conflicting method rankings across three VQA benchmarks (MLLMU-Bench, UnLOK-VQA, MMUBench). Kendall tau analysis over 36 unlearned LLaVA-1.5-7B models reveals two opposing clusters, {FA, RA, MIA} and {AD, JS}, with tau_FA_AD = -0.26, reproduced on BLIP-2 OPT-2.7B. Agreement is lower in multimodal VQA (average tau = 0.086) than in unimodal classification (average tau = 0.158; difference = 0.072), indicating that dual image-and-text pathways amplify inconsistency. We introduce the Unified Quality Score (UQS), a composite metric with weights derived from each metric's Spearman correlation with the oracle distance d(M_hat, M_star), where M_star is the oracle model retrained only on the retain set. RA shows the strongest reliability (rho = 0.484, p = 0.003), while FA is negatively correlated (rho = -0.418, p = 0.011). UQS yields stable rankings under 100 random weight perturbations (tau = 0.647 +- 0.262). We release the benchmark, 36 checkpoints, and an interactive leaderboard. Code and pre-computed results are available at https://github.com/neurips26/UnifiedUnl.

Large language models (LLMs) are increasingly deployed in high-stakes domains, where rare but severe failures can result in irreversible harm. However, prevailing evaluation benchmarks often reduce complex social risk to mean-centered scalar scores, thereby obscuring distributional structure, cross-dimensional interactions, and worst-case behavior. This paper introduces Social Harm Analysis via Risk Profiles (SHARP), a framework for multidimensional, distribution-aware evaluation of social harm. SHARP models harm as a multivariate random variable and integrates explicit decomposition into bias, fairness, ethics, and epistemic reliability with a union-of-failures aggregation reparameterized as additive cumulative log-risk. The framework further employs risk-sensitive distributional statistics, with Conditional Value at Risk (CVaR95) as a primary metric, to characterize worst-case model behavior. Application of SHARP to eleven frontier LLMs, evaluated on a fixed corpus of n=901 socially sensitive prompts, reveals that models with similar average risk can exhibit more than twofold differences in tail exposure and volatility. Across models, dimension-wise marginal tail behavior varies systematically across harm dimensions, with bias exhibiting the strongest tail severities, epistemic and fairness risks occupying intermediate regimes, and ethical misalignment consistently lower; together, these patterns reveal heterogeneous, model-dependent failure structures that scalar benchmarks conflate. These findings indicate that responsible evaluation and governance of LLMs require moving beyond scalar averages toward multidimensional, tail-sensitive risk profiling.

The validity of AI safety evaluations depends on models behaving consistently across controlled and deployment settings. Prior work has identified test-time contextual cues, such as hypothetical scenarios, as a source of verbalized evaluation awareness and subsequent behavioral shift. In this paper, we investigate a potential explanation of this phenomenon: evaluation meta-knowledge, defined as parametric knowledge about the structural traits that characterize evaluations. Similar to dataset contamination, where benchmark exposure leads to higher performance through memorization, we hypothesize that models trained on texts describing evaluation practices may implicitly learn to recognize and respond to evaluation-like contexts, for instance, through exposure to scientific articles or social media posts about AI benchmarking. To test this, we fine-tune models on synthetic documents describing evaluation traits such as verifiable structures or moral dilemmas. Evaluating this fine-tuned model on six safety benchmarks, we find that it is significantly safer than the base model and control model. This behavioral shift persists even when restricting the analysis to responses lacking explicit verbalization of evaluation awareness. Our results demonstrate that evaluation meta-knowledge may inflate safety benchmark performance, introducing a novel confounder that is independent of explicit memorization or verbalized evaluation awareness, thus, challenging to detect. These findings have important implications for the design and interpretation of AI safety evaluations. Our code and models are available at https://github.com/compass-group-tue/arxiv2026_evaluation_meta_knowledge.

Confidence calibration is central to providing accurate and interpretable uncertainty estimates, especially under safety-critical scenarios. However, we find that existing calibration algorithms often overlook the issue of *proximity bias*, a phenomenon where models tend to be more overconfident in low proximity data (i.e., data lying in the sparse region of the data distribution) compared to high proximity samples, and thus suffer from inconsistent miscalibration across different proximity samples. We examine the problem over 504 pretrained ImageNet models and observe that: 1) Proximity bias exists across a wide variety of model architectures and sizes; 2) Transformer-based models are relatively more susceptible to proximity bias than CNN-based models; 3) Proximity bias persists even after performing popular calibration algorithms like temperature scaling; 4) Models tend to overfit more heavily on low proximity samples than on high proximity samples. Motivated by the empirical findings, we propose ProCal, a plug-and-play algorithm with a theoretical guarantee to adjust sample confidence based on proximity. To further quantify the effectiveness of calibration algorithms in mitigating proximity bias, we introduce proximity-informed expected calibration error (PIECE) with theoretical analysis. We show that ProCal is effective in addressing proximity bias and improving calibration on balanced, long-tail, and distribution-shift settings under four metrics over various model architectures. We believe our findings on proximity bias will guide the development of *fairer and better-calibrated* models, contributing to the broader pursuit of trustworthy AI. Our code is available at: https://github.com/MiaoXiong2320/ProximityBias-Calibration.

Null Hypothesis Significance Testing is the de facto tool for assessing effectiveness differences between Information Retrieval systems. Researchers use statistical tests to check whether those differences will generalise to online settings or are just due to the samples observed in the laboratory. Much work has been devoted to studying which test is the most reliable when comparing a pair of systems, but most of the IR real-world experiments involve more than two. In the multiple comparisons scenario, testing several systems simultaneously may inflate the errors committed by the tests. In this paper, we use a new approach to assess the reliability of multiple comparison procedures using simulated and real TREC data. Experiments show that Wilcoxon plus the Benjamini-Hochberg correction yields Type I error rates according to the significance level for typical sample sizes while being the best test in terms of statistical power.

Advanced LLMs have achieved near-ceiling instruction-following accuracy on benchmarks such as IFEval. However, these impressive scores do not necessarily translate to reliable services in real-world use, where users often vary their phrasing, contextual framing, and task formulations. In this paper, we study nuance-oriented reliability: whether models exhibit consistent competence across cousin prompts that convey analogous user intents but with subtle nuances. To quantify this, we introduce a new metric, reliable@k, and develop an automated pipeline that generates high-quality cousin prompts via data augmentation. Building upon this, we construct IFEval++ for systematic evaluation. Across 20 proprietary and 26 open-source LLMs, we find that current models exhibit substantial insufficiency in nuance-oriented reliability -- their performance can drop by up to 61.8% with nuanced prompt modifications. What's more, we characterize it and explore three potential improvement recipes. Our findings highlight nuance-oriented reliability as a crucial yet underexplored next step toward more dependable and trustworthy LLM behavior. Our code and benchmark are accessible: https://github.com/jianshuod/IFEval-pp.

Cross-spectral face recognition systems are designed to enhance the performance of facial recognition systems by enabling cross-modal matching under challenging operational conditions. A particularly relevant application is the matching of near-infrared (NIR) images to visible-spectrum (VIS) images, enabling the verification of individuals by comparing NIR facial captures acquired with VIS reference images. The use of NIR imaging offers several advantages, including greater robustness to illumination variations, better visibility through glasses and glare, and greater resistance to presentation attacks. Despite these claimed benefits, the robustness of NIR-based systems against presentation attacks has not been systematically studied in the literature. In this work, we conduct a comprehensive evaluation into the vulnerability of NIR-VIS cross-spectral face recognition systems to presentation attacks. Our empirical findings indicate that, although these systems exhibit a certain degree of reliability, they remain vulnerable to specific attacks, emphasizing the need for further research in this area.

We introduce a general, flexible, parametric survival modelling framework which encompasses key shapes of hazard function (constant, increasing, decreasing, up-then-down, down-then-up), various common survival distributions (log-logistic, Burr type XII, Weibull, Gompertz), and includes defective distributions (i.e., cure models). This generality is achieved using four basic distributional parameters: two scale-type parameters and two shape parameters. Generalising to covariate dependence, the scale-type regression components correspond to accelerated failure time (AFT) and proportional hazards (PH) models. Therefore, this general formulation unifies the most popular survival models which allows us to consider the practical value of possible modelling choices for survival data. Furthermore, in line with our proposed flexible baseline distribution, we advocate the use of multi-parameter regression in which more than one distributional parameter depends on covariates - rather than the usual convention of having a single covariate-dependent (scale) parameter. While many choices are available, we suggest introducing covariates through just one or other of the two scale parameters, which covers AFT and PH models, in combination with a `power' shape parameter, which allows for more complex non-AFT/non-PH effects, while the other shape parameter remains covariate-independent, and handles automatic selection of the baseline distribution. We explore inferential issues in simulations, both with and without a covariate, with particular focus on evidence concerning the need, or otherwise, to include both AFT and PH parameters. We illustrate the efficacy of our modelling framework by investigating differences between treatment groups using data from a lung cancer study and a melanoma study. Censoring is accommodated throughout.

Exposure-agnostic video frame interpolation (VFI) is a challenging task that aims to recover sharp, high-frame-rate videos from blurry, low-frame-rate inputs captured under unknown and dynamic exposure conditions. Event cameras are sensors with high temporal resolution, making them especially advantageous for this task. However, existing event-guided methods struggle to produce satisfactory results on severely low-frame-rate blurry videos due to the lack of temporal constraints. In this paper, we introduce a novel event-guided framework for exposure-agnostic VFI, addressing this limitation through two key components: a Target-adaptive Event Sampling (TES) and a Target-adaptive Importance Mapping (TIM). Specifically, TES samples events around the target timestamp and the unknown exposure time to better align them with the corresponding blurry frames. TIM then generates an importance map that considers the temporal proximity and spatial relevance of consecutive features to the target. Guided by this map, our framework adaptively blends consecutive features, allowing temporally aligned features to serve as the primary cues while spatially relevant ones offer complementary support. Extensive experiments on both synthetic and real-world datasets demonstrate the effectiveness of our approach in exposure-agnostic VFI scenarios.

Noise plagues many numerical datasets, where the recorded values in the data may fail to match the true underlying values due to reasons including: erroneous sensors, data entry/processing mistakes, or imperfect human estimates. We consider general regression settings with covariates and a potentially corrupted response whose observed values may contain errors. By accounting for various uncertainties, we introduced veracity scores that distinguish between genuine errors and natural data fluctuations, conditioned on the available covariate information in the dataset. We propose a simple yet efficient filtering procedure for eliminating potential errors, and establish theoretical guarantees for our method. We also contribute a new error detection benchmark involving 5 regression datasets with real-world numerical errors (for which the true values are also known). In this benchmark and additional simulation studies, our method identifies incorrect values with better precision/recall than other approaches.

Large language models hallucinate most about entities they have never seen. We ask whether a model's activations betray entity familiarity before a single answer token is generated, and whether that signal predicts the factual reliability of the answers. On four Polish Bielik models (1.5B-11B parameters), we probe four entity domains (athletes, cities, writers, musicians), each with 42 well-known, 42 obscure-but-real, and 42 fabricated entities addressed by a one-sentence question (504 prompts per model). Two unsupervised, single-forward-pass dispersion measures over post-SwiGLU MLP activations, inverse participation ratio and spectral entropy, separate known from fabricated entities at AUROC 0.95-1.00 across all domains and scales; a supervised linear probe reaches 0.99-1.00. Both clear selection-aware permutation floors of about 0.70-0.74 (empirical p<=1e-3), survive held-out layer selection (0.93-0.99), and persist on real names (known vs. obscure-but-real: 0.96-1.00). The signal transfers across entity types (mean off-diagonal AUROC 0.92-0.99); a matched-template counterfactual shows the only large drops are template-caused, not entity-type effects, and the signal is diffuse across heads. This representational signal is already at ceiling at 1.5B, whereas behavioral factual reliability scales sharply: 0, 2, 10, and 19 of 42 known athletes are answered fully correctly by the 1.5B, 4.5B, 7B, and 11B models under a strict judge. Within known entities, separating correct from hallucinated answers is much harder (probe 0.93; dispersion no better than a first-token-entropy baseline). A five-sample semantic-entropy baseline reaches only 0.71-0.83 at 5x the inference cost. Despite this internal awareness, the models almost never abstain: an audit of 2,520 answers finds 2 refusals and 1 hedge. Entity familiarity and factual reliability are distinct phenomena on different scaling curves.

Text-to-image diffusion models have revolutionized visual content generation, but current safety mechanisms apply uniform standards that often fail to account for individual user preferences. These models overlook the diverse safety boundaries shaped by factors like age, mental health, and personal beliefs. To address this, we propose Personalized Safety Alignment (PSA), a framework that allows user-specific control over safety behaviors in generative models. PSA integrates personalized user profiles into the diffusion process, adjusting the model's behavior to match individual safety preferences while preserving image quality. We introduce a new dataset, Sage, which captures user-specific safety preferences and incorporates these profiles through a cross-attention mechanism. Experiments show that PSA outperforms existing methods in harmful content suppression and aligns generated content better with user constraints, achieving higher Win Rate and Pass Rate scores. Our code, data, and models are publicly available at https://torpedo2648.github.io/PSAlign/.

Access to the right evidence does not guarantee that large language models (LLMs) will reason with it correctly. This gap between retrieval and reasoning is especially concerning in clinical settings, where outputs must align with structured protocols. We study this gap using Written Exposure Therapy (WET) guidelines as a testbed. In evaluating model responses to curated clinician-vetted questions, we find that errors persist even when authoritative passages are provided. To address this, we propose an evaluation framework that measures accuracy, consistency, and fidelity of reasoning. Our results highlight both the potential and the risks: retrieval-augmented generation (RAG) can constrain outputs, but safe deployment requires assessing reasoning as rigorously as retrieval.

Attentional, RNN-based encoder-decoder models for abstractive summarization have achieved good performance on short input and output sequences. For longer documents and summaries however these models often include repetitive and incoherent phrases. We introduce a neural network model with a novel intra-attention that attends over the input and continuously generated output separately, and a new training method that combines standard supervised word prediction and reinforcement learning (RL). Models trained only with supervised learning often exhibit "exposure bias" - they assume ground truth is provided at each step during training. However, when standard word prediction is combined with the global sequence prediction training of RL the resulting summaries become more readable. We evaluate this model on the CNN/Daily Mail and New York Times datasets. Our model obtains a 41.16 ROUGE-1 score on the CNN/Daily Mail dataset, an improvement over previous state-of-the-art models. Human evaluation also shows that our model produces higher quality summaries.

Safety alignment of text-to-image (T2I) diffusion models aims to suppress harmful generations while preserving utility on benign prompts. Recent methods often appear to deliver high safety with high utility, but this conclusion rests largely on coarse global utility metrics (e.g., FID, CLIPScore) that are insensitive to fine-grained semantic correctness, creating an illusion of high utility. We show that when utility is measured with structured evaluation, this illusion breaks: on TIFA (Text-to-Image Faithfulness evaluation with Question Answering), safety-aligned models suffer substantial drops in semantic fidelity, including failures in object counts, attributes, and relationships. To diagnose the source of this gap, we analyze the text-encoder prompt embedding space and uncover semantic collapse, a contraction of embedding spread coupled with distortion of inter-prompt similarity structure, which strongly correlates with structured utility loss. Guided by this insight, we propose StructureAware Geometric Regularization (SAGE), a safety alignment objective that explicitly preserves embedding spread and inter-prompt relational structure during adaptation. Our method restores structured utility (TIFA +5.0% over prior state-of-the-art) while maintaining strong safety performance and competitive coarse-grained utility scores. Our source code and trained models are available at https://adeelyousaf.github.io/SAGE_ECCV26_Project_Page/.

Verbal confidence elicitation is widely used to extract uncertainty estimates from LLMs. We tested whether seven instruction-tuned open-weight models (3-9B parameters, four families) produce verbalised confidence that meets minimal validity criteria for item-level Type-2 discrimination under minimal numeric elicitation with greedy decoding. In a pre-registered study (OSF: osf.io/azbvx), 524 TriviaQA items were administered under numeric (0-100) and categorical (10-class) elicitation to eight models at Q5_K_M quantisation on consumer hardware, yielding 8,384 deterministic trials. A psychometric validity screen was applied to each model-format cell. All seven instruct models were classified Invalid on numeric confidence (H2 confirmed, 7/7 vs. predicted >=4/7), with a mean ceiling rate of 91.7% (H1 confirmed). Categorical elicitation did not rescue validity. Instead, it disrupted task performance in six of seven models, producing accuracy below 5% (H4 not confirmed). Token-level logprobability did not usefully predict verbalised confidence under the observed variance regime (H5 confirmed, mean cross-validated R^2 < 0.01). Within the reasoning-distilled model, reasoning-trace length showed a strong negative partial correlation with confidence (rho = -0.36, p < .001), consistent with the Reasoning Contamination Effect. These results do not imply that internal uncertainty representations are absent. They show that minimal verbal elicitation fails to preserve internal signals at the output interface in this model-size regime. Psychometric screening should precede any downstream use of such signals.

Laboratory accidents pose significant risks to human life and property, underscoring the importance of robust safety protocols. Despite advancements in safety training, laboratory personnel may still unknowingly engage in unsafe practices. With the increasing reliance on large language models (LLMs) for guidance in various fields, including laboratory settings, there is a growing concern about their reliability in critical safety-related decision-making. Unlike trained human researchers, LLMs lack formal lab safety education, raising questions about their ability to provide safe and accurate guidance. Existing research on LLM trustworthiness primarily focuses on issues such as ethical compliance, truthfulness, and fairness but fails to fully cover safety-critical real-world applications, like lab safety. To address this gap, we propose the Laboratory Safety Benchmark (LabSafety Bench), a comprehensive evaluation framework based on a new taxonomy aligned with Occupational Safety and Health Administration (OSHA) protocols. This benchmark includes 765 multiple-choice questions verified by human experts, assessing LLMs and vision language models (VLMs) performance in lab safety contexts. Our evaluations demonstrate that while GPT-4o outperforms human participants, it is still prone to critical errors, highlighting the risks of relying on LLMs in safety-critical environments. Our findings emphasize the need for specialized benchmarks to accurately assess the trustworthiness of LLMs in real-world safety applications.

Graphical User Interface (GUI) grounding aims to translate natural language instructions into executable screen coordinates, enabling automated GUI interaction. Nevertheless, incorrect grounding can result in costly, hard-to-reverse actions (e.g., erroneous payment approvals), raising concerns about model reliability. In this paper, we introduce SafeGround, an uncertainty-aware framework for GUI grounding models that enables risk-aware predictions through calibrations before testing. SafeGround leverages a distribution-aware uncertainty quantification method to capture the spatial dispersion of stochastic samples from outputs of any given model. Then, through the calibration process, SafeGround derives a test-time decision threshold with statistically guaranteed false discovery rate (FDR) control. We apply SafeGround on multiple GUI grounding models for the challenging ScreenSpot-Pro benchmark. Experimental results show that our uncertainty measure consistently outperforms existing baselines in distinguishing correct from incorrect predictions, while the calibrated threshold reliably enables rigorous risk control and potentials of substantial system-level accuracy improvements. Across multiple GUI grounding models, SafeGround improves system-level accuracy by up to 5.38% percentage points over Gemini-only inference.

Stable Diffusion is a recent open-source image generation model comparable to proprietary models such as DALLE, Imagen, or Parti. Stable Diffusion comes with a safety filter that aims to prevent generating explicit images. Unfortunately, the filter is obfuscated and poorly documented. This makes it hard for users to prevent misuse in their applications, and to understand the filter's limitations and improve it. We first show that it is easy to generate disturbing content that bypasses the safety filter. We then reverse-engineer the filter and find that while it aims to prevent sexual content, it ignores violence, gore, and other similarly disturbing content. Based on our analysis, we argue safety measures in future model releases should strive to be fully open and properly documented to stimulate security contributions from the community.

Recent incidents involving LLMs used for mental-health support reveal a critical evaluation gap: surface-level safety scores do not capture how models behave across realistic, emotionally sensitive interactions over time. Existing benchmarks measure knowledge, safety, or static response quality, but miss whether LLM interactions help users keep reflecting, coping, and making decisions themselves. We formalize this missing dimension as COGNITIVE ATROPHY, a process-level behavioural measure in AI-mediated mental-health support distinct from safety and helpfulness. To measure it, we introduce COGNITIVE ATROPHY BENCH, a clinically grounded benchmark built from 1,576 fully human-generated counseling conversations, 15,680 turns, and 42,230 responses from five LLMs. Three clinical and neuropsychology experts developed a 20-attribute schema spanning user context, response behaviour, and global risk flags; six trained clinical reviewers applied it with span-grounded evidence, producing 5,324 reviewer judgments. We further introduce the User-Input Risk Index (UIRI), the Cognitive Atrophy Risk Index (ARI), and trajectory summaries. Across five LLMs, models show a consistent moderate-to-high level of atrophy-aligned behaviour across single and multi-turn settings. While models generally respond to overt safety cues, they adapt less reliably when users seek solutions or decisions. The dominant recurring patterns are directive advice, problem-solving, recommendation responses, topic shifts, and forms of validation that may reinforce dependence rather than reflection. Our work makes COGNITIVE ATROPHY measurable and provides a foundation for auditing model behaviour in sensitive LLM conversations.

The introduction of ISO 12913-2:2018 has provided a framework for standardized data collection and reporting procedures for soundscape practitioners. A strong emphasis was placed on the use of calibrated head and torso simulators (HATS) for binaural audio capture to obtain an accurate subjective impression and acoustic measure of the soundscape under evaluation. To auralise the binaural recordings as recorded or at set levels, the audio stimuli and the headphone setup are usually calibrated with a HATS. However, calibrated HATS are too financially prohibitive for most research teams, inevitably diminishing the availability of the soundscape standard. With the increasing availability of soundscape binaural recording datasets, and the importance of cross-cultural validation of the soundscape ISO standards, e.g.\ via the Soundscape Attributes Translation Project (SATP), it is imperative to assess the suitability of cost-effective headphone calibration methods to maximise availability without severely compromising on accuracy. Hence, this study objectively examines an open-circuit voltage (OCV) calibration method in comparison to a calibrated HATS on various soundcard and headphone combinations. Preliminary experiments found that calibration with the OCV method differed significantly from the reference binaural recordings in sound pressure levels, whereas negligible differences in levels were observed with the HATS calibration.

The concentration of radon in the air has been measured in the 700 m-deep Yangyang underground laboratory between October 2004 and May 2022. The average concentrations in two experimental areas, called A6 and A5, were measured to be 53.4pm0.2 Bq/m3 and 33.5pm0.1 Bq/m3, respectively. The lower value in the A5 area reflects the presence of better temperature control and ventilation. The radon concentrations sampled within the two A5 experimental rooms' air are found to be correlated to the local surface temperature outside of the rooms, with correlation coefficients r = 0.22 and r = 0.70. Therefore, the radon concentrations display a seasonal variation, because the local temperature driven by the overground season influences air ventilation in the experimental areas. A fit on the annual residual concentrations finds that the amplitude occurs each year on August, 31pm6 days.

Background and Objective: Radiation pneumonitis (RP) is a side effect of thoracic radiation therapy. Recently, Machine learning (ML) models enhanced with radiomic and dosiomic features provide better predictions by incorporating spatial information beyond DVHs. However, to improve the clinical decision process, we propose to use uncertainty quantification (UQ) to improve the confidence in model prediction. This study evaluates the impact of post hoc UQ methods on the discriminative performance and calibration of ML models for RP prediction. Methods: This study evaluated four ML models: logistic regression (LR), support vector machines (SVM), extreme gradient boosting (XGB), and random forest (RF), using radiomic, dosiomic, and dosimetric features to predict RP. We applied UQ methods, including Patt scaling, isotonic regression, Venn-ABERS predictor, and Conformal Prediction, to quantify uncertainty. Model performance was assessed through Area Under the Receiver Operating Characteristic curve (AUROC), Area Under the Precision-Recall Curve (AUPRC), and Adaptive Calibration Error (ACE) using Leave-One-Out Cross-Validation (LOO-CV). Results: UQ methods enhanced predictive performance, particularly for high-certainty predictions, while also improving calibration. Radiomic and dosiomic features increased model accuracy but introduced calibration challenges, especially for non-linear models like XGB and RF. Performance gains from UQ methods were most noticeable at higher certainty thresholds. Conclusion: Integrating UQ into ML models with radiomic and dosiomic features improves both predictive accuracy and calibration, supporting more reliable clinical decision-making. The findings emphasize the value of UQ methods in enhancing applicability of predictive models for RP in healthcare settings.

Long-lived AI agents are increasingly deployed as persistent operational systems, yet they are still evaluated like freshly initialized models. Day-one benchmarks miss a basic systems question: how long does an agent remain reliable after deployment? Even when model weights are frozen, an agent's effective state keeps changing as it compresses interaction history, retrieves from a growing memory store, revises facts after updates, and undergoes routine maintenance. Reliability therefore becomes a lifespan property of the full agent harness, not only a snapshot property of the base model. We introduce AgingBench, a longitudinal reliability benchmark for agent lifespan engineering: measuring not only whether deployed agents degrade, but what form the degradation takes and where repair should target. AgingBench organizes agent aging into four mechanisms: compression aging, interference aging, revision aging, and maintenance aging. To diagnose these failures, AgingBench uses temporal dependency graphs and paired counterfactual probes that produce diagnostic profiles for the write, retrieval, and utilization stages of the memory pipeline. Across 7 scenarios, 14 models, multiple memory policies, and both runner-controlled and autonomous agents, over ~400 runs spanning 8 - 200 sessions show that agent aging is not one-dimensional: behavioral tests can remain clean while factual precision decays; derived-state tracking can collapse sharply within a single model; and the same wrong answer can require different repairs depending on what the diagnostic profile points to. These results suggest that reliable agent deployment requires lifespan evaluation, mechanism-level diagnosis, and stage-targeted repair, not only stronger day-one models.

Autoexposure (AE) is a critical step applied by camera systems to ensure properly exposed images. While current AE algorithms are effective in well-lit environments with constant illumination, these algorithms still struggle in environments with bright light sources or scenes with abrupt changes in lighting. A significant hurdle in developing new AE algorithms for challenging environments, especially those with time-varying lighting, is the lack of suitable image datasets. To address this issue, we have captured a new 4D exposure dataset that provides a large solution space (i.e., shutter speed range from (1/500 to 15 seconds) over a temporal sequence with moving objects, bright lights, and varying lighting. In addition, we have designed a software platform to allow AE algorithms to be used in a plug-and-play manner with the dataset. Our dataset and associate platform enable repeatable evaluation of different AE algorithms and provide a much-needed starting point to develop better AE methods. We examine several existing AE strategies using our dataset and show that most users prefer a simple saliency method for challenging lighting conditions.

Computer-use agents have rapidly improved on real-world tasks such as web navigation, desktop automation, and software interaction, in some cases surpassing human performance. Yet even when the task and model are unchanged, an agent that succeeds once may fail on a repeated execution of the same task. This raises a fundamental question: if an agent can succeed at a task once, what prevents it from doing so reliably? In this work, we study the sources of unreliability in computer-use agents through three factors: stochasticity during execution, ambiguity in task specification, and variability in agent behavior. We analyze these factors on OSWorld using repeated executions of the same task together with paired statistical tests that capture task-level changes across settings. Our analysis shows that reliability depends on both how tasks are specified and how agent behavior varies across executions. These findings suggest the need to evaluate agents under repeated execution, to allow agents to resolve task ambiguity through interaction, and to favor strategies that remain stable across runs.

Evaluating large language models (LLMs) is crucial for both assessing their capabilities and identifying safety or robustness issues prior to deployment. Reliably measuring abstract and complex phenomena such as 'safety' and 'robustness' requires strong construct validity, that is, having measures that represent what matters to the phenomenon. With a team of 29 expert reviewers, we conduct a systematic review of 445 LLM benchmarks from leading conferences in natural language processing and machine learning. Across the reviewed articles, we find patterns related to the measured phenomena, tasks, and scoring metrics which undermine the validity of the resulting claims. To address these shortcomings, we provide eight key recommendations and detailed actionable guidance to researchers and practitioners in developing LLM benchmarks.

To increase the availability and adoption of the soundscape standard, a low-cost calibration procedure for reproduction of audio stimuli over headphones was proposed as part of the global ``Soundscape Attributes Translation Project'' (SATP) for validating ISO/TS~12913-2:2018 perceived affective quality (PAQ) attribute translations. A previous preliminary study revealed significant deviations from the intended equivalent continuous A-weighted sound pressure levels (L_{A,eq}) using the open-circuit voltage (OCV) calibration procedure. For a more holistic human-centric perspective, the OCV method is further investigated here in terms of psychoacoustic parameters, including relevant exceedance levels to account for temporal effects on the same 27 stimuli from the SATP. Moreover, a within-subjects experiment with 36 participants was conducted to examine the effects of OCV calibration on the PAQ attributes in ISO/TS~12913-2:2018. Bland-Altman analysis of the objective indicators revealed large biases in the OCV method across all weighted sound level and loudness indicators; and roughness indicators at 5{\%} and 10{\%} exceedance levels. Significant perceptual differences due to the OCV method were observed in about 20{\%} of the stimuli, which did not correspond clearly with the biased acoustic indicators. A cautioned interpretation of the objective and perceptual differences due to small and unpaired samples nevertheless provide grounds for further investigation.